My 77 had the oem stock suspension bought 2" - 2 /12" front coils to level it out now the rear is low (maybe the old stock coils were really sagging)thinking of putting blocks in the back. When I measure from the top of axle to frame on front it is 9" rear is 7" so i need 2" blocks for the back? I have never done any suspension work so all help is very appreciated. Also the coils have changed the toe and alignment alot is this normal when raising the suspension?
Community
Message Forum
Photo Gallery
Event Calendar
Book Reviews
Bronco Wallpaper
Bronco FAQ
Link Back to CB!
Photo Gallery
Event Calendar
Book Reviews
Bronco Wallpaper
Bronco FAQ
Link Back to CB!
Buy / Sell
Bronco Tech
3 Arm Wiper Setup
Fix Motor Mount
Roll Cage Braces
Throttle Body 65mm
Wheel Alignment
Heat Riser Replacement
Vent Window Repair
Center Console Mount
Straighten Bumper
Ford 6R80 6 spd
More Tech...
Fix Motor Mount
Roll Cage Braces
Throttle Body 65mm
Wheel Alignment
Heat Riser Replacement
Vent Window Repair
Center Console Mount
Straighten Bumper
Ford 6R80 6 spd
More Tech...
-
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!If you have problems registering or can't log into your account, please contact Admin.
leveling my 77
- Thread starter rolltider
- Start date
garberz
Bronco Influencer
The toe alignment change is normal on the 76'-77' because of the inverted "Y" tie rod system. Blocks can be done on the rear, but to do it up nice, new 2 1/2" leafs would be best.
