Lift measurement

[clc900]

Im trying to figure out how much lift I have from my rear springs. They are 11 pack and I measured from the bottom of the frame to the top of the 9" housing and got 16.25 inches. Anyone care to measure that height (bottom of frame to top of 9" housing) and compare? Thanks!

 

[americanhorses]

I believe stock is 7"

 

[savage]

Stock is about 7" between frame and axle in the front and about 6" between the frame and axle at the back.

 

[ILikeBond]

I've always wondered... is that from the top of the pumpkin, or the top of the cylindrical part of the housing that holds the axles?

 

[bronconut73]

From axle tube to frame front and rear.

 

[clc900]

Thanks guys! Excuse my typo of 16.25" it should be 10.25" So looks like I have a 3.5" lift. Thanks!

 

[Steve83]

The caption of this diagram explains how to get those measurements:



This one shows a different way to measure: