• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on.

    Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Lincoln rear discs

Status
Not open for further replies.

6daze

Sr. Member
Joined
Feb 6, 2007
Messages
798
Includes brackets and calipers;
rotors and ebrakes cables available if you want them....Pics to come
 
OP
OP
6daze

6daze

Sr. Member
Joined
Feb 6, 2007
Messages
798
OK pics are in! These are off a 78 Mark VII. I have the rotors if you really want them but they need to be cleaned up. They probably should be replaced as they are worn on one side more than the other. Plus they will need to be redrilled to 5.5. I also have the ebrake cables, just not a pic yet. Let me know if you want more pics...

FYI, I got this while I was planning on doing this conversion. I later found out that I would need to turn down my axles flanges and probably get the rotors redrilled. It is not a simple bolt on. I since got a good deal on the BC kit and am going with that.

Thanks,
Mark
 

Attachments

  • IMG_1180.jpg
    IMG_1180.jpg
    142.5 KB · Views: 24
  • IMG_1185.jpg
    IMG_1185.jpg
    130.5 KB · Views: 36
  • IMG_1187.jpg
    IMG_1187.jpg
    149.8 KB · Views: 27
Status
Not open for further replies.
Top