• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

LOWERING my Bronco

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
Well some of the parts you dragged home I am sure I would like out here but that is for another time.

Not a whole lot going on out here, I have tinkered with the fuel lines, trans lines, exhaust and dash. Here are some pics of the dash.
 

Attachments

  • DSC02644 (Medium).JPG
    DSC02644 (Medium).JPG
    59.3 KB · Views: 74
  • DSC02641 (Medium).JPG
    DSC02641 (Medium).JPG
    35 KB · Views: 65
  • DSC02642 (Medium).JPG
    DSC02642 (Medium).JPG
    52.1 KB · Views: 105
  • DSC02643 (Medium).JPG
    DSC02643 (Medium).JPG
    37.2 KB · Views: 59
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Looks good. Any progress is good progress. Looks like a radio delete dash. Is an original radio delete dash worth more than a regular dash? The '68 U14 I am going to get has the same dash in it, so I was just wondering.
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
This dash had the radio, fuel tank selector, ash tray and speaker, all gone as well as a bunch of other holes. Way to much time in this dash, I see why the overlays are popular.

I still have to clamp the wires in place and make the efi computer mount up in all of the open space.

Then there is the floor shifter console and radio to locate as well as a few small speakers under the dash in the console.

Front coils are not installed, just working out the little stuff but getting closer I guess.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
One more soccer tournament for the summer season. I coach my son's U15 Boys team. Then I can get back to the street rod project. We have to drive up north and pick up the U14 in the next couple of weekends. I hope to have the coils in place soon, and move on from there. Bear with me guys!
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
OK, I know it has been awhile. This weekend is our last soccer tournment this summer, so I hope to get back on track here. If I can stop myself from buying up other parts that I cannot pass up, I should have this frame rolling soon. Hopefully when I get around to stopping by the body shop, he has got some of the chop work done on the halfcab. So...bear with me guys. I hope to have some update pics coming VERY soon! You other street rod Bronco guys feel free to post your progress also. Let's stay motivated!
 

bronko69er

EB Addict
Joined
Oct 16, 2006
Messages
4,599
Loc.
Renton, WA
Ive got a motor already, see above, and currently trying to work deals on a chassis and tranny. Keep your fingers crossed for me.
Hey behemoth, greatguy says you have a 94" WB, how well does that fit the openings? Would 95" work and not look funky? The rolling chassis I'm after is 95" stock, so I i can get away without WB mods I'd be a happy camper.
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
The wheelbase has changed a little and it is now under 94" roughly 93 1/2 so I did not gain much in my moving the rear and front.

The picture of it from the side is of the truck a this new wheel base.

I was dealt another defeat by the front end today, the new fancy coil overs will not work with my lower a arms. The original coil cup is in the way of the coil and the coil over shock just no way to adjust around it. That and the distance between the lower shock mounts is to small for the QA1 shocks.

I bought the hard line clamps and had some issues there as well, since I have additional cross members I could not use the existing hard lines offered. While trying to fit my lines in to the clamps I ended up stripping the threads in the frame as well as some of the bolts themselves. The frame just does not have enough material to get more than one thread in it. So I drilled larger holes inserted nuts into them and welded them in. I am now on my third generation of hard lines, and I am still thinking that the cost of the efi hose is better than this mess.
 

Attachments

  • DSC00008 (Medium).JPG
    DSC00008 (Medium).JPG
    71.9 KB · Views: 59
  • DSC00007 (Medium).JPG
    DSC00007 (Medium).JPG
    60.2 KB · Views: 60
  • DSC00006 (Medium).JPG
    DSC00006 (Medium).JPG
    65.5 KB · Views: 49
  • DSC00005 (Medium).JPG
    DSC00005 (Medium).JPG
    58.4 KB · Views: 59
  • DSC00004 (Medium).JPG
    DSC00004 (Medium).JPG
    45.2 KB · Views: 58
  • DSC00003 (Medium).JPG
    DSC00003 (Medium).JPG
    54.4 KB · Views: 56
  • DSC00002 (Medium).JPG
    DSC00002 (Medium).JPG
    59.1 KB · Views: 69
  • DSC00001 (Medium).JPG
    DSC00001 (Medium).JPG
    58.7 KB · Views: 49
  • DSCN0279 (Medium).jpg
    DSCN0279 (Medium).jpg
    52.4 KB · Views: 67
  • DSCN0280 (Medium).jpg
    DSCN0280 (Medium).jpg
    62.5 KB · Views: 68
Last edited:

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
Once it is on the road I hope to take it to this years shelter island event, or cruzing grand before the last night in September but that is probably not going to happen.

I figured out a plan for the front arms using these coil overs, I will just plasma out the center section to clear the shock. What is one more piece of custom crap on the front of this thing anyway.

After that is done it is just the return line, the supply line filter, the rear tank, dash wiring, computer mount, steering column, transmission shifter, transmission cooler lines, wire the fan, starter solenoid, and a million other things after that.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Once it is on the road I hope to take it to this years shelter island event, or cruzing grand before the last night in September but that is probably not going to happen.

I figured out a plan for the front arms using these coil overs, I will just plasma out the center section to clear the shock. What is one more piece of custom crap on the front of this thing anyway.

After that is done it is just the return line, the supply line filter, the rear tank, dash wiring, computer mount, steering column, transmission shifter, transmission cooler lines, wire the fan, starter solenoid, and a million other things after that.

No matter how you slice it, it is ALOT of work. If we wanted it to be easy, we would just leave everything stock except the front suspension and call it good. Hang in there buddy. In the end it will all be worth it!:cool:
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
No problem, the coil over issue ended the day it had been a good work day till then. I was hoping to be done under it for a while and could get it back down on the ground to work on the dash and cutting out the window frames.

Next week I guess.

Yes if I wanted easy I would have left it alone, this has been a fun road so far, just bumpy.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I found a 1998 Explorer 4R70W trans with 70,000 miles on it, and a Baumann controller. I know I don't need it right now, and the money could be spent elsewhere, but my 74 daily driver could use the upgrade and the price was a steal. Or...should I go with the auto over the 5 speed for the street rod Bronco? One more decision to make....again!
 

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
I found a 1998 Explorer 4R70W trans with 70,000 miles on it, and a Baumann controller. I know I don't need it right now, and the money could be spent elsewhere, but my 74 daily driver could use the upgrade and the price was a steal. Or...should I go with the auto over the 5 speed for the street rod Bronco? One more decision to make....again!

You can send me that Baumann controller, shoot I'll even throw some profit in for you.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I contacted them and even if the Baumann controller is not the upgarded version, they will upgrade if for a measly $75. Either way it WILL work!

Update: The controller is the newer version. NO worries!
 
Last edited:

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
Well the arms have been cut for the coil overs, the return line has been bent. The aluminum tube used for the hose adapters are in, the column is partially installed. The power steering fittings were todays problem but it has been dealt with.


The upper tube will get trimmed down a little more i think it is a little long and I do not like the bends.
 

Attachments

  • DSC02836 (Medium).JPG
    DSC02836 (Medium).JPG
    79.5 KB · Views: 78
  • DSC02833 (Medium).JPG
    DSC02833 (Medium).JPG
    89.9 KB · Views: 93
  • DSC02832 (Medium).JPG
    DSC02832 (Medium).JPG
    118 KB · Views: 71
  • DSC02831 (Medium).JPG
    DSC02831 (Medium).JPG
    119.2 KB · Views: 71
  • DSC02830 (Medium).JPG
    DSC02830 (Medium).JPG
    83.4 KB · Views: 64
  • DSC02835 (Medium).JPG
    DSC02835 (Medium).JPG
    93.4 KB · Views: 96
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
That looks nice. Good to see your progress. I should be moving forward myself, but my S10 needs some attention right now. It's always something! Keep ME motivated!:cool:
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
the lower arms, coil overs, coils, steering rack all go back on today. Then hopefully the last of the fuel lines. After that I am on to the remote oil filter, the rack and pinion lines would be in the way of the filter in the stock location.

I would like to think that it will be on the ground today again but I doubt it.

Its getting closer.

One thing though do not think about using any an fittings with a 5/16ths line. -5 an is expensive and hard to find. Next time I will drill out the line clamps to 3/8ths and run -6 an for both supply and return. Still might do that here.

Lots to do and it is all little stuff that is taking way to long. Still need to resolve the shifter.
 
Top