• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

make your own spring lock removal tool

allen

Jr. Member
Joined
Jul 29, 2001
Messages
81
i just want to pass along a tip to avoid having to pay 10-20 bucks for the spring lock removal tool for the efi fuel rails. i found on a website that showed all you have to do is cut a thin strip from a spray paint cap and insert it under the spring of the spring lock, guess what, it works, i tried it today after spending $29 at napa for the tool which i promptly returned. figured i'd pass along the info so anyone whos interested can save a buck

allen
 

gearida

Bronco Guru
Joined
Jun 8, 2007
Messages
1,428
Loc.
Newburgh, IN
Are you thinking of cutting away a 1/4" section acrosss the bottom or a slice up the side to make this tool?
 

Mark

Contributor
Bronco Klutz
Joined
Aug 29, 2003
Messages
5,417
Loc.
NW Indiana
I did this trick today and it works. I used a strip of plastic from a "Right Stuff" bottle. Cut off enough to fit around the springlock, jam it in so it pushes between the spring and the lip that the spring locks around and it releases the spring.
The photo is after I disconnected it.
 

Attachments

  • springlocktool1.jpg
    springlocktool1.jpg
    87.7 KB · Views: 183
  • springlocktool2.jpg
    springlocktool2.jpg
    95.8 KB · Views: 186

BroncoMark

Bronco Guru
Joined
Dec 1, 2005
Messages
1,272
Loc.
Irvine CA
I have a set of those disconnect tools, missing the 5/16 one though. There are like 5 or 6 different sizes. Anyone looking to buy a set?
 

bronco117

Jr. Member
Joined
Jun 10, 2005
Messages
62
I use the cap retaining ring off a 20oz soda bottle or oil bottle. They are easy to find laying around the junk yard. Get the fitting wet with some liquide first, cut the ring to fit the big fitting and work it into the fitting with a screw driver, Then cut it shorter and do the small one. Simple.
 

ugly74

Bronco abuser
Joined
Apr 17, 2006
Messages
2,856
Loc.
Colorado
I worked on a 91 Mazda Navajo (explorer) for a neighbor last week, and doing the fuel filter, I needed a tool for it.
I happened to have some 5/16 nylon tubing layin around, so I cut a piece about 3/4" long, cut it lengthwise, slipped it over the fuel line, and pushed it in with pliers. done.
gotta love that redneck ingenuity! ;D
 

toymanator

New Member
Joined
Nov 14, 2006
Messages
44
After having spent an hour or so fiddling around trying to get these stinking things disconnected I stumbled upon this thread and voila! Bump for a great trick!
 
Top