• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Manual 3 Speed Column Shift Linkage

Sheehanigans

Contributor
Jr. Member
Joined
Jul 2, 2014
Messages
60
Loc.
Canton GA
I'm converting back to column shift with a rebuilt column. I've figured out the top side with new rubber bushings and clips, but what goes down here on the transmission levers?

The linkage rods fits nicely in the hole so I don't think it needs a bushing. It looks like I could stack about 4 washers and put a C-clip on it. Is that right?

Thanks!

IidAZmU.jpg
 
Top