Mass buy on 25 gallon tanks

[fechin]

[quote author=jeepster link=board=5;threadid=9261;start=75#67903 date=1032900497]
lets not look a gift horse in the mouth.....time to belly up or stay on the porch. ;D
[/quote]

I think that is what most of us who DON'T want the skid plate want to know. Is that the deal? I don't think anyones saying its not a good deal. Just trying to find out if we're in or not.

Example....If chuck was offering free shipping. Not such a good deal if you live in Hesperia but great if you live in Maine.

As Far as I am concerned it is the best tank on the market and I will buy one eventually. But my rig is along way from needing gas. :-[ But if the price is right...

Fechin

 

[jerry74explorer]

[quote author=Admin link=board=5;threadid=9261;start=60#67688 date=1032829529]<br><br>I just got off the phone with Chuck and there are a few questions that everyone has to answer who wants to order:<br>

• What is your measurement between frame rails at the tank? Looks like some EB's vary.
• Do you want one with or without a skid plate?
• Do you need a filler hose?

<br><br>[/quote]<br><br>Jeepster I was refering to what Jon said about wanting the tank with or without the skid, I knew what Chuck had said earlier about the free skid. When I read what Jon said, after Chucks post, I thought that it sounded like it could go one of two ways: <br>1) normal price on tank + Free Skid Plate <br>2) Special Price on tank + No Skid<br>So its not really an issue, just thought that if we had in fact been given a choice that it might be a good Idea to see which way people wanted to go. Since you could always order the skid plate separate strait from Chuck you might find that more people could afford to get in on the deal if it was in fact offered at a reduced rate. If I missunderstood Jon's post then its still not an issue as I will be along for the ride either way. Was not in any way trying to rock the boat. <br><br>Thanks Chuck for working with us on this!! ;D

 

[ryansbronco]

Hey Fechin It looks like you get on-line a bit quciker than I so if you want to be GB its yours> I alos agree That the best way to do the buy is the tank at a good price. then peps like me who want the skid plate can call chuck up. i still can help out on the shipping and temp storage here in portland.<br>Thanks<br>Bones<br>

 

[fechin]

[quote author=Bones link=board=5;threadid=9261;start=75#68018 date=1032920744]<br>Hey Fechin It looks like you get on-line a bit quciker than I so if you want to be GB its yours> <br>[/quote]<br><br>I don't have a problem being GB. But it looks like allot of details still need to be worked out. Lets wait to hear from Chuck. We'll go from there.<br><br>fechin

 

[Madgyver]

[quote author=fechin link=board=5;threadid=9261;start=75#67915 date=1032901470]<br>If Chuck was offering free shipping. Not such a good deal if you live in Hesperia but great if you live in Maine. <br>[/quote]<br>Or Hawaii.. ;D

 

[GRIZZLY]

[quote author=madgyver link=board=5;threadid=9261;start=75#68080 date=1032937125]<br>[quote author=fechin link=board=5;threadid=9261;start=75#67915 date=1032901470]<br>If Chuck was offering free shipping. Not such a good deal if you live in Hesperia but great if you live in Maine. <br>[/quote]<br>Or Hawaii.. ;D<br>[/quote]You could have taken it back as a carryon junior!

 

[GRIZZLY]

Are their any solid #'s on prices yet? By the time this is worked out you can count me in too.

 

[chuck]

My bad, I was looking at the trans. skid plate price/cost. The tank skid plate is $65. I was planning to<br> only do a tank and skid plate combo. because I can do a better deal that way but if people do not<br>want the skid plate I can work with that but the deal is not as good. Tank with skid plate = $310,<br> Tank only = $279. Both would be + shipping + tax if in CA and + fill & vent hose if needed, The<br> hoses are $15 for the set. The shipping would be less without the skid plate

 

[supermottl]

I'm Totally in! When, where, who do we give our info and greenbacks too!!! ;D<br>Chuck, I might also be interested in a new rear driveshaft, just need a little more info.. I'll get at you later.<br><br>This is gonna be sweet!!!

 

[bpassmore]

SO, is the GB decided? Is fetchin doing it? or Bones? I got alot of free time on my hands. I have no problem setting up an escroe account in paypal and assembling buyers/ money/ shipping info<br><br>I would be glad to do this.

 

[chuck]

See my earlier post for arangements, no need to get too complicated.

 

[bpassmore]

Like I said, Ive got Plenty of time on my hands to do this. I am here to help and offer myself to do so if all agrees..

 

[fechin]

[quote author=bpassmore link=board=5;threadid=9261;start=75#68167 date=1032976482]<br>SO, is the GB decided? Is fetchin doing it? or Bones? [/quote]<br><br>I'm in.....I guess peoples first choice was Bones as GB since he started this thread. But I believe he would do it if there were no other options.<br><br>I could act as GB if nobody has any objections?<br><br><br>Fechin

 

[dd71]

How far down does this tank hang below the frame with 2 inch body lift? <br> DAVE

 

[Jeepster]

[quote author=dd71 link=board=5;threadid=9261;start=90#68236 date=1032993317]<br>How far down does this tank hang below the frame with 2 inch body lift? <br> DAVE<br>[/quote]<br><br>how 'bout with no lift?

 

[Hobe]

This is a great idea but it needs to have a little more focus (starting to sound a bit like a soap opera) to get it done.<br><br>Seems to be some confusion on who is or wants to be the, (GB) after looking back through the post Bones is clearly the man!! If he would like to hand it off ( I think that is what I understood) then it looks like SgtRock was the first to volunteer. Bones is that good with you? SgtRock you sure you want to ride this pony? If so lets rock and roll.<br><br>If Bones and SgtRock pass on it looks like Fechin is up, come on and lets get this going.<br><br>I don't mean to tweak any noses but this thing is pages long and days old without a clear plan yet. Bones you the man...what say you?<br><br>

 

[admin]

Yeah, the planning stage has gone on long enough. Let's get some action! <br><br>I've started a new "sticky" thread with all the instructions on how to get in on the deal.<br><br>http://classicbroncos.com/forums/index.php?board=5;action=display;threadid=9532

 

[chuck]

[quote author=jeepster link=board=5;threadid=9261;start=90#68239 date=1032994000]<br>[quote author=dd71 link=board=5;threadid=9261;start=90#68236 date=1032993317]<br>3" below the bumper with no lift so with a 2" lift it would hang 1" <br> DAVE<br>[/quote]<br><br>how 'bout with no lift?<br>[/quote]