I have found a 2000 Mountaineer that runs and drives good. I am going to use the engine and transmission in my Bronco. Those are my first priorities next I want to use have the cruise control work and have AC. I have the donor car and have a goal. There is a large gap between the two though.
I would like to borrow as much wisdom as possible. The mountaineer is fully drivable and the Bronco is torn down to the frame. I have a new FG body(Bronco Design) with the body panels fitted but no holes cut in the firewall or mounting brackets complete.
My basic plan is:
1)mount the engine and transmission to the bronco frame
2)place the FG body on the frame
3)route all wires, lines, cables and attach brackets
4)run engine(probably)
5) remove everything for paint and powder coat frame
5a) bedline underside of body and floor of body
5b) paint body and half cab and full top
6) reinstall drivetrain
7) reinstall body
8) mount all molding and seals
9) Rest
10) Road trip
Can you point me to as much detailed information as can be found?
Also parts lists?
Advice? Nothing is too simple or will insult me.
There are so many details.
Thanks All
J. Blood
I would like to borrow as much wisdom as possible. The mountaineer is fully drivable and the Bronco is torn down to the frame. I have a new FG body(Bronco Design) with the body panels fitted but no holes cut in the firewall or mounting brackets complete.
My basic plan is:
1)mount the engine and transmission to the bronco frame
2)place the FG body on the frame
3)route all wires, lines, cables and attach brackets
4)run engine(probably)
5) remove everything for paint and powder coat frame
5a) bedline underside of body and floor of body
5b) paint body and half cab and full top
6) reinstall drivetrain
7) reinstall body
8) mount all molding and seals
9) Rest
10) Road trip
Can you point me to as much detailed information as can be found?
Also parts lists?
Advice? Nothing is too simple or will insult me.
There are so many details.
Thanks All
J. Blood
Last edited:











