• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Mountaineer meet Bronco

jblood79

New Member
Joined
Jul 28, 2016
Messages
24
Loc.
Tulsa
I have found a 2000 Mountaineer that runs and drives good. I am going to use the engine and transmission in my Bronco. Those are my first priorities next I want to use have the cruise control work and have AC. I have the donor car and have a goal. There is a large gap between the two though.

I would like to borrow as much wisdom as possible. The mountaineer is fully drivable and the Bronco is torn down to the frame. I have a new FG body(Bronco Design) with the body panels fitted but no holes cut in the firewall or mounting brackets complete.

My basic plan is:
1)mount the engine and transmission to the bronco frame
2)place the FG body on the frame
3)route all wires, lines, cables and attach brackets
4)run engine(probably)
5) remove everything for paint and powder coat frame
5a) bedline underside of body and floor of body
5b) paint body and half cab and full top
6) reinstall drivetrain
7) reinstall body
8) mount all molding and seals
9) Rest
10) Road trip

Can you point me to as much detailed information as can be found?
Also parts lists?
Advice? Nothing is too simple or will insult me.
There are so many details.

Thanks All
J. Blood
 
Last edited:

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
EFI Guy has the wiring harness, PCM and cruise control figured out.

Consider his Explorer threads required reading, not all you need to know but the place to start.
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
You have to make a decision on tire and wheels size and how much lift you are planning to run. You don't want to have to redo stuff as you go along. Get an extra spare computer for the efi system so they can be programmed at the same time saving you allot of hassle down the road. Decisions on bumpers and tire carriers and roll cage need to be done so that mounting hassles can be done before you go to paint.

Get yourself a big azz white board and a set of markers your gonna need it. Remember that Bronco parts are not in stock all the time everywhere so plan months ahead for what your planning to do next month. Take pictures and tag and bag everything. Don't dispose of any parts until your done. Many a problem have been solved going back to the salvage pile.
 
OP
OP
J

jblood79

New Member
Joined
Jul 28, 2016
Messages
24
Loc.
Tulsa
I am researching the adapter between the 4R70 and D20 and I see it is 1.5" longer. Will the drive shafts need lengthened(front) and shortened(rear)?
 
OP
OP
J

jblood79

New Member
Joined
Jul 28, 2016
Messages
24
Loc.
Tulsa
I am also researching disc brakes. Is there a good practical reason to convert all 4 to disc? Is the kit from Wildhorse the best choice for cost and time? I expect I should get the angled booster. Correct?
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
I am researching the adapter between the 4R70 and D20 and I see it is 1.5" longer. Will the drive shafts need lengthened(front) and shortened(rear)?

There are other factors to consider.
Will it be lifted?
Will the rear axle be moved back?.
It is likely both will need replaced or altered

I am also researching disc brakes. Is there a good practical reason to convert all 4 to disc? Is the kit from Wildhorse the best choice for cost and time? I expect I should get the angled booster. Correct?

There are arguments for and against four wheel disk brakes.
Even though the rear brakes from the Mountaineer/Explorer can be fitted to the Bronco rear I consider the WH kit to be a better idea.

The angled booster is one choice, but depending on tire size hydroboost may be a better option.
 

Twidgeon

Jr. Member
Joined
Jul 13, 2016
Messages
112
I have just done the same thing with an explorer. I have a build link with a lot of the parts used for the swap. Let me know if I can help.dd
 
OP
OP
J

jblood79

New Member
Joined
Jul 28, 2016
Messages
24
Loc.
Tulsa
Update 9/24/18

Engine and transmission are removed from Explorer and fit up in the Bronco. I used an adapter and kept the Bronco transfer case. Moved the transmission mount back about 1.5 inch.

Note: I am using a Bronco design FG body. Automatic, AC, power steering and cruise control.

Questions:

1) The intake is hitting the hood without a body lift. Are there any option other than a 2 inch body lift?

2) The body radiator mount is hitting the steering box without body lift. Other options?

3) What is the best option for radiator and AC condenser? Open to buying new radiator...

4) Do I need to keep the intermediate knuckle on the driveshaft?

Thank you in advance for your thoughts, opinions and furnished wisdom.

JB

See pictures here.
https://drive.google.com/drive/folde...v-?usp=sharing
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
Update 9/24/18

Engine and transmission are removed from Explorer and fit up in the Bronco. I used an adapter and kept the Bronco transfer case. Moved the transmission mount back about 1.5 inch.

Note: I am using a Bronco design FG body. Automatic, AC, power steering and cruise control.

Questions:

1) The intake is hitting the hood without a body lift. Are there any option other than a 2 inch body lift?

2) The body radiator mount is hitting the steering box without body lift. Other options?

3) What is the best option for radiator and AC condenser? Open to buying new radiator...

4) Do I need to keep the intermediate knuckle on the driveshaft?

Thank you in advance for your thoughts, opinions and furnished wisdom.

JB

See pictures here.
https://drive.google.com/drive/folde...v-?usp=sharing

Yes, there are 1 inch body lifts.
Do you need 2 inches to clear?
Or will 1 inch be enough?
 

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,720
Loc.
San Martin, CA
Update 9/24/18

Engine and transmission are removed from Explorer and fit up in the Bronco. I used an adapter and kept the Bronco transfer case. Moved the transmission mount back about 1.5 inch.

Note: I am using a Bronco design FG body. Automatic, AC, power steering and cruise control.

Questions:

1) The intake is hitting the hood without a body lift. Are there any option other than a 2 inch body lift?

2) The body radiator mount is hitting the steering box without body lift. Other options?

3) What is the best option for radiator and AC condenser? Open to buying new radiator...

4) Do I need to keep the intermediate knuckle on the driveshaft?

Thank you in advance for your thoughts, opinions and furnished wisdom.

JB

See pictures here.
https://drive.google.com/drive/folde...v-?usp=sharing

That is not a Factory steering box set up... And IMHO I don't like how the frame has been notched to make it work.
I am guessing it will be a custom install to make everything fit around it...
 

Attachments

  • 20180923_183446.jpg
    20180923_183446.jpg
    77 KB · Views: 127
OP
OP
J

jblood79

New Member
Joined
Jul 28, 2016
Messages
24
Loc.
Tulsa
904-Yes the steering box was inherited from the previous hack. It is not what I would have done but it is there and should be functional. The frame is ugly but reinforced...unless there is a great reason to not use this box.

Sykan
It looks like the best fit is a 2 inch body lift. This solves the air intake interference and the steering box. Although I think I am going to have to customize the radiator mount to fit the radiator and condenser.


Thanks JB
 

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,720
Loc.
San Martin, CA
Regretfully, I am well experienced in dealing with PO's shoddy and creative work... It is a challenge.

You could go with the 2" body lift and less suspension lift. You would have the tire clearance and a little less vehicle height... Just a thought.
 
Top