Tito
CB Fire Starter
Alright I have a lot of stuff I have collect that I wanted to use but things changed a little bit and I need to reduce the load and get it out of here as we are putting the house up for rent and it doesnt help to have piles of tires and Bronco parts all over the place.
This is a very incomplete list and will be adding to it as I find stuff.
Everything right now is for pick up only and I will gladly trade parts for labor to get my yard cleared.
74 tub - needs driver quarter (have a 77 to put on), floors decent, needs rockers or sliders has front clip $SOLD
s
68 tub - cut in half already, was going to use as a trailer, rear section is pretty good, just needs flairs, I even have a frame you can use to out it on for a trailer (front was bent). $SOLD
D44 FW HP out of a 78, complete including tie rod, drag link, track bar, all the way out to the hubs. Would make a perfect candidate for a knuckles out disc brake conversion, can deal or you can come take parts. $SOLD
Still have housing for HP D44 with 3.50 carrier and gears as well as the axle set. housing and gears $50 axles $50 both $SOLD
Tire carriers galore...red, black, powder coated chrome $GONE
Set of 5 steel black rims in good condition just have pink overspray on them :-X 5 on 5.5 pattern, 16 x 8 I believe $150
Radius arms, have like 10
Doors - some good ones and some good for trail doors...Shawn, we need to get that yeller set over to you $75 or less each
I have 2 hard tops that need to go $175 (chrome) and 150 (nonchrome)
Also a hard top that would be good for chopping up and making a half cab with $Gone
Have a half cab top that need fixed along the drip rail and mounting area in front and sides. Its somewhat rough but the side and back panels are very good and has glass $SOLD
A couple trail fenders in decent shape $Gone
A hood from a 68 with the latch on it...has some rust in the front lip $Gone
A 66 bench seat, the back is fairly decent but the bottom part has some spring damage and needs foam and cover. Original silver vinyl $SOLD
2wd C4, good for parts and pieces I figure $Went to Scrap
2wd NP435 that I took out of mine, has the square output, easiest to use $125
Fiberglass front fenders $150 pair
Fiberglass front inner fenders and skirts, just need a core support to make up a front clip. $175
Full pass quarter panel section, tail light is good, wheel tub is good, quarter panel up and low is good, just needs a striker really, will get pics. $50
Hard top Drip rail chrome trim, removed well, good shape, needs polishing $60
Frame, excellent shape, no title but might be able to put in for a salvage, think it is from a 69 or 71, I'll have to look at the vin. $75
Set of VW seat, good shape $20
I am sure many other things, would really like to get these gone before I drop them off for scrap.
This is a very incomplete list and will be adding to it as I find stuff.
Everything right now is for pick up only and I will gladly trade parts for labor to get my yard cleared.
74 tub - needs driver quarter (have a 77 to put on), floors decent, needs rockers or sliders has front clip $SOLD
s
68 tub - cut in half already, was going to use as a trailer, rear section is pretty good, just needs flairs, I even have a frame you can use to out it on for a trailer (front was bent). $SOLD
D44 FW HP out of a 78, complete including tie rod, drag link, track bar, all the way out to the hubs. Would make a perfect candidate for a knuckles out disc brake conversion, can deal or you can come take parts. $SOLD
Still have housing for HP D44 with 3.50 carrier and gears as well as the axle set. housing and gears $50 axles $50 both $SOLD
Tire carriers galore...red, black, powder coated chrome $GONE
Set of 5 steel black rims in good condition just have pink overspray on them :-X 5 on 5.5 pattern, 16 x 8 I believe $150
Radius arms, have like 10
Doors - some good ones and some good for trail doors...Shawn, we need to get that yeller set over to you $75 or less each
I have 2 hard tops that need to go $175 (chrome) and 150 (nonchrome)
Also a hard top that would be good for chopping up and making a half cab with $Gone
Have a half cab top that need fixed along the drip rail and mounting area in front and sides. Its somewhat rough but the side and back panels are very good and has glass $SOLD
A couple trail fenders in decent shape $Gone
A hood from a 68 with the latch on it...has some rust in the front lip $Gone
A 66 bench seat, the back is fairly decent but the bottom part has some spring damage and needs foam and cover. Original silver vinyl $SOLD
2wd C4, good for parts and pieces I figure $Went to Scrap
2wd NP435 that I took out of mine, has the square output, easiest to use $125
Fiberglass front fenders $150 pair
Fiberglass front inner fenders and skirts, just need a core support to make up a front clip. $175
Full pass quarter panel section, tail light is good, wheel tub is good, quarter panel up and low is good, just needs a striker really, will get pics. $50
Hard top Drip rail chrome trim, removed well, good shape, needs polishing $60
Frame, excellent shape, no title but might be able to put in for a salvage, think it is from a 69 or 71, I'll have to look at the vin. $75
Set of VW seat, good shape $20
I am sure many other things, would really like to get these gone before I drop them off for scrap.
Attachments
Last edited:
%) ;D 
