• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Moving rear axle back?

Aaron68

New Member
Joined
May 18, 2002
Messages
16
Loc.
Taylorsville, Utah
I'm creeping on the idea of moving my rear axle back 3-6", seems like a pretty straight forward operation. So my question to those of you that have already done it; any special considerations, advice, pics would be cool to if you have them. TIA
 

Case

Sr. Member
Joined
Dec 7, 2003
Messages
855
do you want a longer wheel base or shorter rear overhang?? might be eaiser to cut frame in front of rear axle and lengthen it. I have seen some pics of broncos with longer wheelbases, some with 4 doors.
 

mxpaz

Bronco Guru
Joined
Jun 21, 2001
Messages
2,901
Loc.
KC
I moved mine back 6 inches. I did a 3 link on it so it was pretty easy. You will have to loose the gas tank. I think if you stay under 4 inches you wont have to move the tank. I have Gorilla Warflares to stretch out for the big ass opening.
 
OP
OP
A

Aaron68

New Member
Joined
May 18, 2002
Messages
16
Loc.
Taylorsville, Utah
My intentions were for both; lengthen wheelbase and increase my departure angles and overhang out back. I am planning on buying a new gas tank anyways, so would it be possible for me to "notch" out the new tank to clearance it for the axle housing? TIA
 

mxpaz

Bronco Guru
Joined
Jun 21, 2001
Messages
2,901
Loc.
KC
Yep, thats what we did on my buddy Jakes Bronco. He has the BCBroncos tank and we just cut it up so it would fit back there. He only moved his back 5 inches.
 

INPHOBIC

Bronco Guru
Joined
Jul 26, 2001
Messages
1,809
Loc.
Kansas City, KS
actually only went back 4 inches. Cut 4" off the front of the old school 23 gal tank. Fixed the pick up tube design while I was in there. No need to run an accumulator anymore with a good pick up tube!

I've $250 in my 3 link with 3 johnny joints and new springs with adjustable perches. Way cheaper than the $500 I had just spent on nation springs. Bill's was way cheaper as we just used what we had around.
Jake
 
OP
OP
A

Aaron68

New Member
Joined
May 18, 2002
Messages
16
Loc.
Taylorsville, Utah
Jake, do you have any pictures of your rig you could send me? How much rear overhang are you left with, what size tires? What did you do about the rear fender opening, did you stretch your fender flares? Thanks again.

Aaron Heugly
 
Top