• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

muffler options

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
Looking for opinions on mufflers. I'm looking for a good muffler for a 351w without the noise of a flowmaster. I have them on the wifes 66 and I get pulled over whenever I drive it. I thought about the borlas from jegs.<br><br><br><br><br><br><br><br><br>
 

LSUpete

Contributor
Bronco Guru
Joined
Jul 11, 2001
Messages
2,065
Steve,<br><br>Try the Flownaster Delta series 50. I know you said no Flowmster, but I had a set of these on my '74 model and they were very quiet. 8)
 

red76

Full Member
Joined
Jul 11, 2002
Messages
240
Loc.
Raleigh, NC
I have magnaflow turbos and they have they good deep sound and they are not loud. I would go with those. Just me though.<br><br>Will
 

ASE-73

Sr. Member
Joined
Oct 7, 2002
Messages
780
Loc.
Seattle, WA
I know everyone is hard-core on flowmasters, but I like Borla Mufflers. They have a muffled and controlled growl off-idle and upon acceleration, but are perfectly balanced ... very quiet, but with a commanding tone. Would be best described as a "gentlemen's flowmaster". They are also stainless steel, so they last forever ... both structurally and in terms of sound. <br>
 

tonto

Bronco Guru
Joined
Oct 16, 2001
Messages
1,484
[quote author=ASE-73 link=board=5;threadid=11089;start=0#81434 date=1036859719]<br>I know everyone is hard-core on flowmasters, but I like Borla Mufflers. They have a muffled and controlled growl off-idle and upon acceleration, but are perfectly balanced ... very quiet, but with a commanding tone. Would be best described as a "gentlemen's flowmaster". They are also stainless steel, so they last forever ... both structurally and in terms of sound. <br><br>[/quote]<br>I went for a ride in an E.B. with Borla's last week and this description is exactly how I would describe them.
 

tonto

Bronco Guru
Joined
Oct 16, 2001
Messages
1,484
I ran all stainless steel tubing two into one but re-used my old muffler until I could find someone with Borla's, I'm hesitant on using the Borla's there small in design and may not be big enough to run a single with a 351W/5.8 motor.<br>I was looking at them a few weeks ago, they have an excellent web site Borla, and all the mufflers on ther website have dimensions and inlet sizes. <br>I also got all my stainless steel tubing from a company that deals pretty much with NHRA and NASCAR in Costa Mesa called Burns Stainless<br>they have straight and most importantly mandrel bent stainless bent tubing in many different dia., the bends are kind of pricey but make for a nice looking exhaust, I know you have a bender now but stainless doesn’t like to bend like standard steel tubing it likes to kink in on it's self in the bend, although that was on a muffler shop bender your bender might do better.<br>Also I just mig welded it with standard steel wire it was just like welding normal steel, no problem.<br>So yes I'm running two into one, mainly because I don't believe I ever hit the RPM's that a dual exhaust benefits and I like the extra room it gives for things like an air tank under the bed floor. Later, Francois.<br>
 

lars

Contributor
Been here awhile
Joined
Jun 29, 2001
Messages
3,334
Loc.
NorCal flatlands
Ever one to be different, I used a Spintech.<br>http://www.spintechmufflers.com/<br>I've got the truck/RV model, their quietest. Single muffler, dual 2 1/2" in, single 3" out. Sounds not at all like the dual 40 series flowmasters it replaced. If you call them they are very helpful. The mufflers are stout enough to double as skid plates.
 

77BroncoWag

Bronco Guru
Joined
May 23, 2001
Messages
4,033
[quote author=LSUpete link=board=5;threadid=11089;start=0#81413 date=1036846716]<br>Steve,<br><br>Try the Flownaster Delta series 50. I know you said no Flowmster, but I had a set of these on my '74 model and they were very quiet. 8)<br>[/quote]<br><br>Flowmaster Warranty suck though!<br><br>What are the prices of these other options?
 

74bronc

Bronco Guru
Joined
Jul 28, 2001
Messages
3,736
[quote author=77BroncoWag link=board=5;threadid=11089;start=0#81476 date=1036872239]<br>[quote author=LSUpete link=board=5;threadid=11089;start=0#81413 date=1036846716]<br>Steve,<br><br>Try the Flownaster Delta series 50. I know you said no Flowmster, but I had a set of these on my '74 model and they were very quiet. 8)<br>[/quote]<br><br>How often would you ever have to use a warranty on a muffler though? I have been using the same flowmasters for 4 years and have yet to have a problem. I don''t see the warranty issue as a big deal except for security reasons to make you feel like you got your money's worth. I would buy another set of flowmasters even with the crappy warranty. I just like the sound and haven't found anything comparable. Everyone's taste in mufflers is different so you have to take everything said with a grain of salt. Listen to some different types of mufflers, then make your decision.<br><br>Flowmaster Warranty suck though!<br><br>What are the prices of these other options?<br>[/quote]
 

77BroncoWag

Bronco Guru
Joined
May 23, 2001
Messages
4,033
had one go bad at the exit of the muffler at 16 months(SOL) A guy at work had 2 go bad on his mustang one at 3 months(free replacment and the other side at 13 months he was going to have to buy another instead instead bit the bullet and bought another brand recomended by the shop(owner even said flowmaster sucked) I'll post the name of the muffler when my memory comes back :-[. I know it was not borla.
 

bsaunder

Bronco Guru
Joined
Nov 14, 2001
Messages
1,064
what about Gibson ? - saw an older f250 with a Gibson on it and it had a very nice sound to it - low rumble at idle, pretty quite at cruise, but good roar when the pedal was down...
 

77BroncoWag

Bronco Guru
Joined
May 23, 2001
Messages
4,033
[quote author=77BroncoWag link=board=5;threadid=11089;start=0#81937 date=1037058513]<br>had one go bad at the exit of the muffler at 16 months(SOL) A guy at work had 2 go bad on his mustang one at 3 months(free replacment and the other side at 13 months he was going to have to buy another instead instead bit the bullet and bought another brand recomended by the shop(owner even said flowmaster sucked) I'll post the name of the muffler when my memory comes back :-[. I know it was not borla.<br>[/quote]<br><br>I think it was magnaflow ???
 
Top