• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Mustang A9L Computer

Status
Not open for further replies.

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
Looking for a mustang 5.0 Mass Air computer for Explorer motor install. I know there are a few computers that will work, let me know what you've got.
 
Last edited:
OP
OP
Tito

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
Yeah I have got my eye on those, I just cant believe I have to pay that much for the computer. Am I going to get any noticeable performance decrease with the other compatible computers you think?

A9L / A3M / A3M1 / S0Z / D3D1 / A9S / 8LD
A9P / C3W / C3W1 / A9M / A9T / 8LF
 
OP
OP
Tito

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
Thanks for reminding me, I found one for 75 and forgot to call.

Ahh, they have them listed but they dont actually have them %) %) %)
 
Last edited:
OP
OP
Tito

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
That is up in another tab, thats where I got what computer codes to look for. I just wasnt sure what to do between auto and manual computers. I am searching that in tab 5 ;D
 

Bronco Brian

Bronco Guru
Joined
Feb 10, 2006
Messages
1,140
Let me ask you this if you had an A9L computer in your hands, how long before you would have it running?
 
OP
OP
Tito

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
Haha, I am going to try and pull it off next weekend if it isnt too bad of weather, well even if it is I still might. I just need to be able to have it in an immobilized position for a week or so till I get it all sorted out and have my driveshafts lengthened and shortened, etc.

So after a little more reading is this correct...
If you are using the Auto computer, be sure to use the auto setup on the RJM harness, if manual then use manual. I know the only diff seems to be the NSS, what do I do about this if I am not using an auto and want it disabled?
 
Status
Not open for further replies.
Top