• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

My cage build

snipes243

Bronco Guru
Joined
Oct 12, 2006
Messages
1,274
Loc.
Huntersville, NC
Figuire I would post some pictures on my new roll cage for my half cab
broncorebuild015.jpg

broncorebuild_009.jpg

4C15BA11-02B1-4D8A-85C6-E12DBA3B8CBE-3209-0000044F5F38E5FA.jpg

3BFAE4E4-E0DA-4D1C-A369-526664F97405-3209-0000044F4B9CE18A.jpg

0FC044F0-3467-4F05-8299-E3BEBD3A4D80-3209-0000044F4000C9ED.jpg
 

gnsteam

Contributor
Bronco Guru
Joined
Jan 29, 2010
Messages
3,522
Loc.
Lincoln NE
Looks like you put a lot of though into the design. I see added mounting tabs in the dash area. Building a custom dash? Looking forward to seeing what your up to, good work so far.:cool:
 
OP
OP
snipes243

snipes243

Bronco Guru
Joined
Oct 12, 2006
Messages
1,274
Loc.
Huntersville, NC
Looks great. Did you use bendtech software or just draw it up?
Yeah I used the bendtech for main hoop, but everything else was done with out.
Looks like you put a lot of though into the design. I see added mounting tabs in the dash area. Building a custom dash? Looking forward to seeing what your up to, good work so far.:cool:
Yeah I really tired to think as much out as possible, the cage came out great it fits in there super tight to maximize space. I wanted a custom dash for a long, which end up awesome and gave plenty off leg room to the passenger. The other cool thing about cage is when you shut the door you can even seen the cage.
looking good there clay. do you plan to tie it into the chasis?
I will be tying it into the frame. and will also run support bars from through the half cab to rear bed floor.
 
Top