need help with solenoid wiring

[nbo62]

hello gang ,new to the sight and need a little direction.just picked up a 75 bronco and i was changing wires and vacuum lines and such and cant find the correct way any where in my manual to put the battery cables to the solenoid,starter and ground on correctly.i have one crossed some where and dont want to experiment and wreck something.could some one give me a little direction on this matter:

 

[70_Steve]

Positive battery cable goes to the BAT+ terminal on the solenoid. Should be the big stud right next to the S connection. Starter cable goes from the other big stud, next to the I connection, down to the starter. Negative battery cable should be bolted to the engine block.

Make sure the rest of the grounds exist. Engine block serves as the main grounding point. Run a ground strap from the engine (usually at the rear of the intake manifold) to the body (somewhere close on the firewall), and a second strap from the engine to the frame.

 

[Pokey71]

http://classicbroncos.com/forums/showthread.php?t=103500
the second post has a picture

 

[nbo62]

thanks for the help