Need ideas for running main chassis brake line

[RODRIG3911]

Has anyone had any luck installing a pre-bent main chassis hard brake line?? I made a hole in my old one while grinding (Long story ). I took off the old one and am having one hell of a time re-running the new one without taking off my transmission/body lol. Please give me some tips or ideas. Thanks guys

 

[MattW]

It's a pain, but doable. The main problem I ran into was my replacement one seemed to be about 2" longer than the stock. Ended up taking out the slack by bending it ever so slightly going down the frame a time or two. Over the length of the frame the 2" disappeared and I was able to get it to go in.

 

[66ALRIDE]

I've used the ones from LMC with no problems.

 

[RODRIG3911]

Thanks guys. I'm going to try again tomorrow and see if I can run it.