• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Need pics of front fender fitment

Bigbird

Sr. Member
Joined
Jan 12, 2004
Messages
505
I just got my new fenders delivered today. I set them up on the body and they didn't seem right. I think the door posts need to trimmed down. The door hinge posts were replaced and I think they might need a bit of work. Can someone post up a pic or two on the spacing between the front fenders and the cowl? Right where the back side of the fenders meet the cowl below the windshield? Thanks in advance for your help.
 

migs

Sponsor/Vendor
Bronco Guru
Joined
Nov 12, 2011
Messages
1,321
like this? sorry for all the undercoating, but hope these help...
 

Attachments

  • photo1.jpg
    photo1.jpg
    58 KB · Views: 76
  • photo2.jpg
    photo2.jpg
    89.1 KB · Views: 70
  • photo3.jpg
    photo3.jpg
    70.4 KB · Views: 67
  • photo4.jpg
    photo4.jpg
    70.9 KB · Views: 65
  • photo5.jpg
    photo5.jpg
    88.3 KB · Views: 70
  • photo6.jpg
    photo6.jpg
    76 KB · Views: 62
  • photo7.jpg
    photo7.jpg
    101.7 KB · Views: 63

AZ73

Contributor
Bronco Guru
Joined
Mar 28, 2012
Messages
3,546
FYI my new fenders needed extensive work.
 

admin

Administrator
Just your friendly, neighborhood webmaster...
Joined
Jan 1, 2001
Messages
38,757
Loc.
Phoenix, AZ
FYI my new fenders needed extensive work.
Yep. So did mine. I had also replaced/patched door posts, but in the end I think they all need some massaging to get any of the aftermarket boy panels to fit.
 
Top