• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Need Pictures of Front Drums

jperry1290

Sr. Member
Joined
Jul 1, 2010
Messages
920
I need pictures of front drum brakes (pref from a 1970) with the drum removed showing all of the springs attached. I pulled the parts off and cant find the way they go back on. I have a haynes manual but the pictures dont appear to be the same as my set up.
 

airbur

Bronco Guru
Joined
Jun 3, 2008
Messages
2,763
Loc.
Castle Pines, CO
Sorry...don't have any of front drums..but here are my rears before the rebuild...
 

Attachments

  • CIMG4908.jpg
    CIMG4908.jpg
    78.3 KB · Views: 16
  • CIMG4911.jpg
    CIMG4911.jpg
    82.3 KB · Views: 6
  • CIMG4912.jpg
    CIMG4912.jpg
    77.2 KB · Views: 11

ManTruck

Bronco Guru
Joined
Apr 17, 2003
Messages
1,269
Heres from a D44 but should help.
 

Attachments

  • P5180001.jpg
    P5180001.jpg
    113.2 KB · Views: 26
  • P5180002.jpg
    P5180002.jpg
    111.2 KB · Views: 20
  • P5180009.jpg
    P5180009.jpg
    119.4 KB · Views: 28

Airmapper

Foolproofness Tester
Joined
Mar 15, 2006
Messages
1,710
Loc.
Bowling Green, KY
Here is the front drum setup of my '66 with a D30:

IMG_3449_800x600.JPG


If you need one close up, let me know and I'll run out and take a few pics, that was one I already had on the computer.
 

Airmapper

Foolproofness Tester
Joined
Mar 15, 2006
Messages
1,710
Loc.
Bowling Green, KY
Per request, hope these show it better. The spring going all the way across above the center hub is using the same holes as the main springs.

I don't guarantee those to be correct, but the way I replaced them is since I had everything new I pulled off the old shoes and springs as a unit, then built the new next to that using the old as a template to make sure I had everything in the correct location.

IMG_3692_1024_768.JPG


IMG_3693_1024_768.JPG
 
Top