• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

new perforated coolant hose????

JohnJohn

Contributor
Bronco Guru
Joined
May 6, 2005
Messages
2,179
Loc.
Richmond
I noticed on my bronco that my brand new 5/8" heater hose that runs to my heater core was leaking coolant. As I looked closer I noticed a drop was coming out every 6 inches or so in a line all the way down the hose. It looked to even to be a random hole so I went to the parts store this morning to buy a section of hose to replace my factory defective one.
When I looked the new hose section over it also had small needle holes in a row all the way down the new hose. It also had in white letters something about safety perforated hose and that it was only in the outer layer????

Why would they sell hoses with holes in them?
Now I need to find coolant hose without holes. Does anyone know why they would do this?
 
OP
OP
JohnJohn

JohnJohn

Contributor
Bronco Guru
Joined
May 6, 2005
Messages
2,179
Loc.
Richmond
I could not find a lot on Google but I did find a full size bronco guy that had the same problem. http://www.fullsizebronco.com/forum/showthread.php?t=150082

"Opened the hood and noticed my two heater hoses seem to have tiny pin holes spaced even throughout both holes."

I am betting its some genius at the DOT that came up with a way to stop global warming antifreeze spills by putting holes in my hose. Just like all the new EPA gas can spouts that now force me to spill stuff all over the place in the name of environmentally friendly. (sorry I am in one of those moods today)
 

00gyrhed

Bronco Guru
Joined
Aug 3, 2006
Messages
2,428
my PS return hoses seeped little droplets all along their length. not enough to drip, kind of looked like a cold glass of water sweating. I figured the guy at the parts store gave me the wrong type hose but I checked the numbers and it was right.

so I figured it was just poorly made and bought hoses somewhere else.
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
Thats why I buy all my hose that is not preformed from my local hydraulic hose shop, better quality hose and usually less money. I switched to silicone heater hose years ago and will never go back to regular hose, lasts virtually forever, is way more flexible and not near so sensitive about getting a little too close to headers and such, not laying on just close.
 

Hozr

Bronco Guru
Joined
Oct 15, 2011
Messages
1,439
Loc.
Rogue Valley, OR
I can't even begin to fathom the reasons for perforating hose. It's like dehydrated water.

(Add) - I had to research it because it's so strange - looks to be USCG thing? Any maritime folks on here have a clue?
 

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
That's weird. Probably related to pressure and flow relief for some unique application.
 

EricLar80

Bronco Guru
Joined
Jun 14, 2001
Messages
2,170
I can't even begin to fathom the reasons for perforating hose. It's like dehydrated water.

(Add) - I had to research it because it's so strange - looks to be USCG thing? Any maritime folks on here have a clue?

My guess is that only the outer layer was supposed to be perforated, but the machine wasn't set up right and went all the way through for that batch.

Hoses are made so that the inner portion for the hose is chemically compatible with the material it is carrying, and the outer section is to handle the pressure and provide protection from UV light and abrasion. I am assuming the perforation is supposed to let you know that the inner hose has been compromised due to aging and is time to change it before the fluid is spilled in a more environmentally-unfriendly way. Makes sense in a maritime application, I guess.

Eric
 
OP
OP
JohnJohn

JohnJohn

Contributor
Bronco Guru
Joined
May 6, 2005
Messages
2,179
Loc.
Richmond
I visited another Autozone today and had them show me their bulk 5/8" heater hose. It had the holes every 6 inches or so and the words safety perforated hose all down the whole hose.
The manager was blown away and said he would order a different brand without holes.

The brand name on the box was ArmorMark.
 
Top