• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

New production bodies

Redhorse1

Jr. Member
Joined
Nov 29, 2014
Messages
138
If I replaced the body on my 66 halfcab with a reproduced body from Dennis carpenter would it be as valuable as a total body restore? Aren't the repro bodies built with the same parts as the reproduction panels?
 

thegreatjustino

Contributor
Red Head Grease Monkey
Joined
Jan 23, 2002
Messages
16,291
Loc.
Stockton, CA
If you read the disclaimer on the pre-assembled bodies, they specifically point out that they are based on 68-76 bodies and do not include any of the various differences that the 66/67 bodies had nor do they include the 77 fuel doors. That being said, the only person who would notice this is someone specifically looking for a '66 correct Bronco. To that person, the repro body would kill the sale. To just about everyone else, it wouldn't make any difference.

My $0.02
 

Whoaa

Bronco Guru
Joined
Sep 26, 2014
Messages
1,059
^...I agree w/ this logic.

In the world of Piper airplanes, they started making new [aftermarket] replacement fuselages about 15 years. At first they weren't popular because they weren't "authentic" Piper. Today a Super Cub w/ a new chromeoly frame is considered the best.

The new airplanes frames of today are stronger, obviously no 40-60 year old rust or fix's, lighter, and safer....just overall better. Its ironic how views change over time, and the similarities between collector cars and classic airplanes.
 

navalbronco66

Full Member
Joined
Sep 22, 2013
Messages
270
How's the quality of Dennis carpenter sheet metal parts as opposed to bronco graveyard, or toms bronco parts?
 

englewoodcowboy

Lick Creek Restorations
Joined
Jul 25, 2010
Messages
4,201
Actually they are based on 66 through 76. They have the holes through the cowl for the vacuum tubes for the wiper motors, welded windshield frame hinges and the gutters on the floor boards which were a 66 only item... they are a little all over the place for being a year specific but they are decent. I know they are still working to fine tune them more but the ones I have seen looked really nice.
 

nickgp

Bronco Guru
Joined
Jan 17, 2010
Messages
1,024
This is a slippery slope. I think the more original sheet metal there is the better. However, the lack of good, solid examples are getting harder to find.
 

C Saporito

Full Member
Joined
Oct 18, 2007
Messages
259
Has anyone seen a Bronco built using Denis Carpenters steel body? I would be interested in using one for a future project, I'd like to see a finished product first though.
 

clarrance

Bronco Guru
Joined
Mar 3, 2005
Messages
2,675
Has anyone seen a Bronco built using Denis Carpenters steel body? I would be interested in using one for a future project, I'd like to see a finished product first though.

So far there have only been 3-4 bodies released, they are in the process of being built right now.
 

durwood71

Jr. Member
Joined
Nov 21, 2010
Messages
89
I used JBG's Bronco tub kit for my '71 frame-off. There were some fit issues as you usually have with repro parts but I'm happy with the result. It probably won't pass for a stock original restoration but I wasn't going for that anyway. There are a few pics in my garage. The only original reused parts are the doors, grill, and dash. I don't have the doors and top on yet but we have been driving it. My wife LOVES it! Btw it's hers not mine, built to her specs! It's getting cooler here so I need to get busy and get the doors and top on. (Rampage soft top).
 

elan

Sr. Member
Joined
May 27, 2015
Messages
541
Loc.
s
I look forward to seeing more after market tub sightings here.

If I cannot find a rust free tub in my area (good luck) I'm going down this new tub road. I figure I would save money in the long run compared to the cost of replacing panels and body work and the old tub.

And, if I replace panels from the same folk making the tubs........what's the difference?
It is still after market. Isn't it nice that these companies are making the effort?
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Anybody know if there's a waiting list? If so, anyone wanting one for an existing project might want to add their name sooner rather than later. These things have a way of taking lots of time from dream to reality. Sometimes anyway...

Paul
 

thegreatjustino

Contributor
Red Head Grease Monkey
Joined
Jan 23, 2002
Messages
16,291
Loc.
Stockton, CA
Actually they are based on 66 through 76. They have the holes through the cowl for the vacuum tubes for the wiper motors, welded windshield frame hinges and the gutters on the floor boards which were a 66 only item... they are a little all over the place for being a year specific but they are decent. I know they are still working to fine tune them more but the ones I have seen looked really nice.

"All New 1968-76 Reproduction Body Tub.
Our steel Bronco body tubs are assambled from reproduction components that have been reverse engineered from original Ford Parts making bodies that look, fit, and mount JUST LIKE THE ORIGINALS
Coated with Weld-Thur Primer
NOTE: this 1968-76 style body does not include many of the 1966-67 oddities nor the 1977 gas tank filler door."
 

C Saporito

Full Member
Joined
Oct 18, 2007
Messages
259
"All New 1968-76 Reproduction Body Tub.
Our steel Bronco body tubs are assambled from reproduction components that have been reverse engineered from original Ford Parts making bodies that look, fit, and mount JUST LIKE THE ORIGINALS
Coated with Weld-Thur Primer
NOTE: this 1968-76 style body does not include many of the 1966-67 oddities nor the 1977 gas tank filler door."


Maybe if they become as popular as the fiberglass bodies it would be worth building them as ordered.
 

englewoodcowboy

Lick Creek Restorations
Joined
Jul 25, 2010
Messages
4,201
"All New 1968-76 Reproduction Body Tub.
Our steel Bronco body tubs are assambled from reproduction components that have been reverse engineered from original Ford Parts making bodies that look, fit, and mount JUST LIKE THE ORIGINALS
Coated with Weld-Thur Primer
NOTE: this 1968-76 style body does not include many of the 1966-67 oddities nor the 1977 gas tank filler door."

Umm what exactly is your point. You are quoting how it is listed which was probably typed up by a less than knowledgable staff member and I am telling you exactly what they come with. I spent 2 days staring at one and looking it over while my cage was being built so I know exactly what they come with or at least body #2 has... :cool: As I stated before they are all over the place with unique items from the 66 model year through the 76... Floor gutters, which they have, was a 66 only item and the holes in the cowl for the vacuum lines for the 66-68 wiper setup and the windshield frame is drilled for the electric wipers and later roof mount.
 

thegreatjustino

Contributor
Red Head Grease Monkey
Joined
Jan 23, 2002
Messages
16,291
Loc.
Stockton, CA
As the OP asked, is there a difference. The answer is yes. These are not '66 bodies. Your comments further prove my point.
 

englewoodcowboy

Lick Creek Restorations
Joined
Jul 25, 2010
Messages
4,201
As the OP asked, is there a difference. The answer is yes. These are not '66 bodies. Your comments further prove my point.

I see where you are coming from and yes you are absolutely correct these are not 66 bodies. I was just adding to the general questions of what others were asking commenting on and was giving my actual first hand knowledge. If the OP wants one of these tubs, he will have to source 66 specific door striker posts and change them out as they are in a slightly different location to match up to the 66 doors. This was one of the other unique things to the 66 tubs that was different from the rest. He would also have to get a 66 specific or at least 66-68 windshield frame and swap that as well to be more accurate.

Either way, I have yet to see the broncos be knocked down in value of they have replacement metal and if done right, no one would be the wiser. A restoration is just that, you are replacing and or repairing the old with new or like new. Good luck with your endeavor.
 

AWS

Sr. Member
Joined
Aug 2, 2004
Messages
596
Loc.
ST LOUIS
Anybody know if there's a waiting list? If so, anyone wanting one for an existing project might want to add their name sooner rather than later. These things have a way of taking lots of time from dream to reality. Sometimes anyway...

Paul

Paul, I have one heading to my shop in St. Louis, about 5 weeks before it gets here.

Steve
 
OP
OP
R

Redhorse1

Jr. Member
Joined
Nov 29, 2014
Messages
138
I am nearing just getting it on the road with the original 66 body . In the future it may become a body restore but for now I'm leaving it original . Will it be retain its value as valuable as a original rusty 66 halfcab numbers matching truck.
 

clarrance

Bronco Guru
Joined
Mar 3, 2005
Messages
2,675
The first few tubs will be more like the 66-67 bodies than the rest. I also have spent some time inspecting (3) different new DC tubs. All (3) have a lot of 66-67 parts as mentioned. Rain gutter on drivers floor, holes in cowl, fuse block cut outs, shorter kick panels, & missing indention for Ford emblem on the drivers side inner rocker. DC is still working out all the fine details. Either way the bodies are very nice and will be the way to go if you need a new tub.
 

notorious

Jr. Member
Joined
Jan 11, 2011
Messages
66
Loc.
Nashvegas
This is my base plan, I figured a year or so of builds and they will have the kinks worked out. It seems to just make since, figuring the average rig will need most of the common replacements for a premium resto. I have seen some of the licensed bodies for Camaro's and Mustang's and they are spot on. I would like to see Ford license these tubs though.
 
Top