New to the forum and it's already been a big help! Thanks to those who chimed in on my thread asking for some help in the Santa Rosa area. I ended up buying the Bronco, so now the fun begins. Thought I'd post some pics and a few things I'm working on- since I didn't actually get to work on them today! I already feel more productive. %)
It's not in bad shape and drives pretty nicely. Has a 351W hooked up to a 4r70w transmission with an old Baumannator. Dana 44 front end with disc brakes and Ford 9 rear with rebuilt drums. 4.5" lift with Bilstein shocks currently on 35" Duratrac tires.
What I'm working on/thinking about now:
- I'm thinking about dropping it 1" and putting some smaller A/T tires on it for improved road cruising use. It's not going to see a lot of off road (especially in the near future), though I'd like to have the option to do a bit if I get the chance.
It also currently has no front drive shaft, as the old one (which I have) didn't measure up after the lift. I'll need a new one but best to wait until I've lowered the vehicle to measure this back up.
- Horn doesn't work and blinkers/hazards work intermittently, not at all, or show solid. Found out there are LED bulbs installed with original flasher units, so getting LED compatible units. I'll be taking the steering wheel apart to check the horn and blinker/hazard switch. May have to replace with the switch from Tom's.
- Remove and inspect, then replace and/or tighten top bolt on track bar. There was a little movement when moving the wheels side to side.
I've not spent a lot of time working on vehicles before, but this is my second Bronco. I had a '95 FSB about 10 years ago, and have been wanting another ever since. Looking forward to learning!
It's not in bad shape and drives pretty nicely. Has a 351W hooked up to a 4r70w transmission with an old Baumannator. Dana 44 front end with disc brakes and Ford 9 rear with rebuilt drums. 4.5" lift with Bilstein shocks currently on 35" Duratrac tires.
What I'm working on/thinking about now:
- I'm thinking about dropping it 1" and putting some smaller A/T tires on it for improved road cruising use. It's not going to see a lot of off road (especially in the near future), though I'd like to have the option to do a bit if I get the chance.
It also currently has no front drive shaft, as the old one (which I have) didn't measure up after the lift. I'll need a new one but best to wait until I've lowered the vehicle to measure this back up.
- Horn doesn't work and blinkers/hazards work intermittently, not at all, or show solid. Found out there are LED bulbs installed with original flasher units, so getting LED compatible units. I'll be taking the steering wheel apart to check the horn and blinker/hazard switch. May have to replace with the switch from Tom's.
- Remove and inspect, then replace and/or tighten top bolt on track bar. There was a little movement when moving the wheels side to side.
I've not spent a lot of time working on vehicles before, but this is my second Bronco. I had a '95 FSB about 10 years ago, and have been wanting another ever since. Looking forward to learning!











