• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

no right front turn signal

yak67

Bronco Guru
Joined
May 15, 2003
Messages
1,561
I've got a couple year old Centech harness.....as the title says, I'm missing a right front turn signal, my parking light is working, the rear is working. I used my wire tester and getting a signal at the plug in at the column, the flasher is working, but nothing at the signal or in the engin bay.....so it's under the dash somewhere, any ideas?????
 

surfer-b

Contributor
Bronco Guru
Joined
Sep 7, 2006
Messages
3,013
Find a place where you have current, maybe the flasher, splice into the wire from there to the turn signal thats not working and see what you get, you can take a sewing needle or saftey pin and stick into the wire then alligator clip onto this, baiscally you are bypassing the harness from the flasher to the signal, just make sure and unhook the harness at the signal so you don't backfeed the circuit, if this works then you know its between the flasher and the signal. It could be the connector in the engine bay, I have never used a centech harness so I'm not familar with where the connectors are, its going to be a process of elimination and will probably be time consuming.
 
Top