brbuilder
Full Member
- Joined
- Aug 19, 2007
- Messages
- 176
My RF tun signal is not working. RR and left side turn signals work as do all of the em flashers including the RF. Where does the wiring split for the RF and RR turn signals? This is on a ‘69 if that matters.
The wire to the RF turn signal is white with a blue stripe. The 2 wires coming from my steering column for the turn signals are green with an orange stripe for the left turn signal. Changes to yellow with a black stripe at a 2-pin connector. The other wire for the right turn signal is orange with a purple stripe and changes to light green at the 2-pin connector. I can’t find where it changes to a white with blue stripe wire.
My fuse box is located just above and to the right of the gas pedal. This is also where most of the wires penetrate the firewall to the engine area.
The wire to the RF turn signal is white with a blue stripe. The 2 wires coming from my steering column for the turn signals are green with an orange stripe for the left turn signal. Changes to yellow with a black stripe at a 2-pin connector. The other wire for the right turn signal is orange with a purple stripe and changes to light green at the 2-pin connector. I can’t find where it changes to a white with blue stripe wire.
My fuse box is located just above and to the right of the gas pedal. This is also where most of the wires penetrate the firewall to the engine area.











