SOLD NP435 & NP205 Setup

[buck68]

I have an NP435 and NP205 transmission and transfer case setup for an early bronco. We were going to use this for my son's project but went in another direction. Everything pictured is included. Comes with the transmission, transfer case, custom cross member to install in the Early Bronco, transmission shifter, PTO with attachment, 2 choices of shifter boot, transmission tunnel cover and NP205 side mount.

$450 OBO

 

[fordguy]

no bellhousing, right? can you post a pic of the crossmember

 

[buck68]

Cross member is already attached to the setup.

 

[sk1nw4lk3r]

Besides a bellhousing, anything else necessary to install this in a 70 with a 3 speed manual currently in it? Is the trans and transfer case rebuilt? Thanks.

 

[buck68]

You can use the current bellhousing on the 302 . It bolts up to the transmission. The transmission has new gaskets and the transfer case was good . Everything was cleaned up and painted. The setup was purchased from a member on classics . Shifter handle will need to be bent or you could cut it and run a gearbanger shifter from Wildhorses

 

[buck68]

The side mount for the np205 will need to be mocked up and installed. I included the side mount for the 205 for the full size Bronco to use for a starting point.

 

[69broncov8]

Interested can you ship

 

[buck68]

I'd prefer not to ship at this time, trying to sell it locally first. Thank you for the interest.