• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

O2 bung thread size?

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
I need to plug the hole until I finish my EFI swap. I can't find anything that will fit. I read somewhere that a certain spark plug had the same thread, would anybody know that plug part number or what that plug fits?
 

chuzie

Bronco Guru
Joined
Jul 21, 2006
Messages
2,761
I ended up going through a handful at the parts counter before i found a spark plug to fit.

Sent from my SAMSUNG-S3 using Tapatalk 2 on CyanogenMod
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
I get M18-1.5 half nuts from the local nut and bolt specialty shop. About $1 each
 

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
I bought a plug from NAPA. Just asked for it and they had it behind the counter. It was stupidly expensive at $6!
 

chuzie

Bronco Guru
Joined
Jul 21, 2006
Messages
2,761
Just like everything at napa. Go with the $1 spark plug

Sent from my SAMSUNG-S3 using Tapatalk 2 on CyanogenMod
 

dclack

Sr. Member
Joined
Feb 16, 2012
Messages
402
Why not just plug it with an O2 sensor. You could probably get some used ones for free at a junk yard. Just remember to replace them before you start running your EFI.
 
Top