• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

OBD2 Fuel Line

gbrew

Jr. Member
Joined
Aug 28, 2015
Messages
141
Hey guys I could use a little help with my fuel line. The engine is a 5.0 from a 99 mountaineer. The intake, injectors and fuel rails are original and I have installed a Sherman tank with the pump from WH. I have gotten rid of the donor vehicle so I'm not sure about the make up or components needed for the line itself. I think I need a regulator mounted near the tank with a short return line and gauge. Have read to adjust the pressure to 65psi. I'm sure I need a filter but not sure if it makes much difference where to mount it. One thing that has me baffled is the original braided flex line at the fuel rail has special connectors so I don't understand how to connect an AN fitting or any other fitting for that matter to it. Also I'm not sure if I could run all braided steel line from tank to rails or incorporate tubing(is so what flares and fittings)??? As always thanks so much for your much needed help!! Greg
 
OP
OP
G

gbrew

Jr. Member
Joined
Aug 28, 2015
Messages
141
Fuel Line Pics

Missed the pics
 

Attachments

  • IMG_20170607_154849366.jpg
    IMG_20170607_154849366.jpg
    80.6 KB · Views: 102
  • IMG_20170607_154922191.jpg
    IMG_20170607_154922191.jpg
    55.3 KB · Views: 96

spap

Bronco Guru
Joined
Jan 2, 2010
Messages
2,642
Don't forget the inline fuel filter hopefully you saved it from the explorer
 

Casey835

Sr. Member
Joined
Mar 8, 2008
Messages
759
3b512ad31db10c6d605ea29d2f09242f.jpg


I modified the intank fuel pump/pressure regulator/filter into my peeling Sherman tank with additional inline filter all ss braided fuel line.
Sent from my iPad using Tapatalk
 
OP
OP
G

gbrew

Jr. Member
Joined
Aug 28, 2015
Messages
141
That's the missing piece to the puzzle. I didn't remove the pump/sending unit from the tank before installing it but does it have a filter and regulator inside the tank? If there is a regulator with the pump or built into the pump there should be no need for and additional one correct? Also are you saying you used braided steel lines from tank to rails? Thanks Again
 

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,720
Loc.
San Martin, CA
That's the missing piece to the puzzle. I didn't remove the pump/sending unit from the tank before installing it but does it have a filter and regulator inside the tank? If there is a regulator with the pump or built into the pump there should be no need for and additional one correct? Also are you saying you used braided steel lines from tank to rails? Thanks Again

Single line Explorers (no return) have a regulator in the pump assembly that keeps your pressure around 65 psi. The Reg just dumps the excess back into the tank.

For an external Regulator, EFI Guy suggested this one: https://www.summitracing.com/parts/aei-13129/overview/

You can run the in tank pump out to an external regulator and then have it return the excess back to the Sherman tank. You are going to need a fuel filter on the fuel going to the motor. It needs to filter down to 10 microns, as that is what the factory filter did.

There are a number of Threads on what filter to use (Chevy one comes to mind) with tubing or braided line. One thing to be sure of is getting a fuel line that will not degrade with the gasoline mixes we have today.
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
1999 through 2001 Explorer / Mountaineer are returnless systems, the regulator is with the fuel pump in the tank.

The 1996 through 1998 fuel system are return type and not compatible replacement parts for yours.
 
OP
OP
G

gbrew

Jr. Member
Joined
Aug 28, 2015
Messages
141
Great info I really appreciate it! I'll do some checking on the filter and order that adapter. You guys always get me out of a bind, Thanks, Greg
 
Top