Hey guys I could use a little help with my fuel line. The engine is a 5.0 from a 99 mountaineer. The intake, injectors and fuel rails are original and I have installed a Sherman tank with the pump from WH. I have gotten rid of the donor vehicle so I'm not sure about the make up or components needed for the line itself. I think I need a regulator mounted near the tank with a short return line and gauge. Have read to adjust the pressure to 65psi. I'm sure I need a filter but not sure if it makes much difference where to mount it. One thing that has me baffled is the original braided flex line at the fuel rail has special connectors so I don't understand how to connect an AN fitting or any other fitting for that matter to it. Also I'm not sure if I could run all braided steel line from tank to rails or incorporate tubing(is so what flares and fittings)??? As always thanks so much for your much needed help!! Greg











