OCBR 2014 - Sale or swap thread

[lilthom]

Here is an assortment of stuff. I can bring any of these to OCBR.

Well, I guess I won't have to haul any of this stuff to Arkansas so Ebay, here I go.

 

[fablife]

tires/wheels/ac

5) Mickey Thompson Baja Claw radials 35/12.5/17 95% (1 is new) mounted on 5)17"x9 Moto Metal wheels 5/5.5 bp $ 2000 OBO
------------------------------------------------------------------
4) 38.5/14.5/16.5 super swamper SX's/ 40-50% v-grooved center lugs mounted on recentered H1 rims,
5/5.5 lug pattern/ 2" backspace/ 3/8" thick centers/ internal, magnesium (run flat cut down) beadlocks
1) brand new 38.5/14.5/16.5 SX tire (never mounted or used)
1) like new 38.5/14.5/16.5 SX tire (has 1" side wall cut) I was told it could be fixed, but never did it
used for rock crawling so they have rock rash (worn edges), but still have a lot of life left. $ 1250 OBO /trade?
-------------------------------------------------------------------------------------

original ac unit worked fine when removed
all interior parts, engine brkts, have condensor but it don't look too good $BO
---------------------------------------------------------------------------------
hi back, suspension seats, unknown brand, but look nice. no rips or tears and has bronco mounts with towel bar sliders $200 OBO

 

[sprdv1]

Well, I guess I won't have to haul any of this stuff to Arkansas so Ebay, here I go.

Good luck brother..

 

[stout22]

Anyone got a good full hard top?

 

[JSBX]

Parts I need. Dana 44 drivers side axle. Shift lever for a Koening PTO winch or the hole winch with a good lever.

 

[Wyflyer]

I have a running 170 I6 with 3 speed and radiator. It's still in the frame but if someone wants it I could bring it. Don't have a price as of yet

 

[Kyle.malone]

Guess I should go through my pile o parts..


SPRDV - what dashes you got? text me pics

 

[sprdv1]

Guess I should go through my pile o parts..


SPRDV - what dashes you got? text me pics

will do bud

 

[sprdv1]

Parts I need. Stock breather. Dana 44 drivers side axle. Shift lever for a Koening PTO winch or the hole winch with a good lever.

I got a stock breather, pretty good condition, let me get a pic. $20 ?

 

[JSBX]

I got a stock breather, pretty good condition, let me get a pic. $20 ?

You don't have to get a picture I will take it. Will send yo a PM
Thanks James.

 

[mp]

I have the following and can bring if anyone shows interest:

-a stock air cleaner assembly
-Whitco (I think) canvas full soft doors for inserts (gray in color)--came off my U13
-engine plate for manual transmission - new
-big PSC ram, single end
-more stuff as I find it

I NEED:
-full size D44 axles for trail spares

 

[sprdv1]

You don't have to get a picture I will take it. Will send yo a PM
Thanks James.

Ok brother. Just a few more days. Thank goodness

 

[1sorbronc77]

Ocbr parts list

28 spline axles, short and long side with big bearings. $150--- "GRANT"
76 disc dana 44 , 4.11 gears. $600.00---"KERRY YOUNG"
power steering gear box, that was just rebuilt .$350---"KERRY YOUNG"
Explorer upper and lower intake. $100---"KERRY YOUNG"
76 Power brake setup"used" $150---"KERRY YOUNG"

 

[sprdv1]

Anybody need a tonneau cover ?

http://classicbroncos.com/forums/showthread.php?t=242920

 

[Wyflyer]

5) Mickey Thompson Baja Claw radials 35/12.5/17 95% (1 is new) mounted on 5)17"x9 Moto Metal wheels 5/5.5 bp $ 2000 OBO
------------------------------------------------------------------
4) 38.5/14.5/16.5 super swamper SX's/ 40-50% v-grooved center lugs mounted on recentered H1 rims,
5/5.5 lug pattern/ 2" backspace/ 3/8" thick centers/ internal, magnesium (run flat cut down) beadlocks
1) brand new 38.5/14.5/16.5 SX tire (never mounted or used)
1) like new 38.5/14.5/16.5 SX tire (has 1" side wall cut) I was told it could be fixed, but never did it
used for rock crawling so they have rock rash (worn edges), but still have a lot of life left. $ 1250 OBO /trade?
-------------------------------------------------------------------------------------

original ac unit worked fine when removed
all interior parts, engine brkts, have condensor but it don't look too good $BO
---------------------------------------------------------------------------------
hi back, suspension seats, unknown brand, but look nice. no rips or tears and has bronco mounts with towel bar sliders $200 OBO

I sent you a PM asking about the A/C unit

 

[JSBX]

28 spline axles, short and long side with big bearings. $150--- "GRANT"
76 disc dana 44 , 4.11 gears. $600.00---"KERRY YOUNG"
power steering gear box, that was just rebuilt .$350---"KERRY YOUNG"
Explorer upper and lower intake. $100---"KERRY YOUNG"
76 Power brake setup"used" $150---"KERRY YOUNG"

Sent you a PM with some questions.

 

[SC74]

Looking for a driver side door latch (the one that catches the striker).

 

[JSBX]

I need a good bulk head.
Thanks James.

 

[SpareParts]

I'll take the fuel cell/tank. Do you have a pic of it?

 

[JSBX]

Fuel cell

I'll take the fuel cell/tank. Do you have a pic of it?

There is one problem with it though. The fitting for the fuel pick up has something like JB weld around the base I assume the weld must have broke lose. Here are the pictures.