AR OCBR 2019 For Sale Thread!!!

[BroncoBub]

my score today not for sale

Just curious what store did you find the mecum ones?

 

[sprdv1]

Back to top....

Just curious what store did you find the mecum ones?

somewhere in ks, my buddy wouldn't say..

Ping him on FB, he has more, and can likely sell extra that he don't want to keep. Michael Mudd

He dropped by w/2 boxes LOL I'll take that and that and that

 

[sprdv1]

Just curious what store did you find the mecum ones?

Couple sites you can check
https://www.diecastmodelswholesale.com/search.php?search_query=bronco&Search=Search

https://www.collectablediecast.com/catalogsearch/result/?q=bronco

 

[BroncoBub]

Couple sites you can check
https://www.diecastmodelswholesale.com/search.php?search_query=bronco&Search=Search

https://www.collectablediecast.com/catalogsearch/result/?q=bronco

ok thanks

 

[kshinnall]

I've got a set of 2.5" coil springs, less then 500 miles on them $80 and a tube front bumper (painted silver) $80 OBO.
Can text pictures if anyone is interested.

 

[Banjer Picker]

I've got a set of 2.5" coil springs, less then 500 miles on them $80 and a tube front bumper (painted silver) $80 OBO.
Can text pictures if anyone is interested.

What brand are the springs?

 

[kshinnall]

They are from Jeffs Bronco Graveyard.

 

[stout22]

I have a set of Duff's stock drop brackets that came with Duff's long arms.
Silver vein color - make an offer

Also have some well used 7 degree C-bushings - Free

 

[Banjer Picker]

I have a set of Duff's stock drop brackets that came with Duff's long arms.
Silver vein color - make an offer

Also have some well used 7 degree C-bushings - Free

I think I might need those brackets. I just picked up a set of used long arms.

Would you mind sending a couple pics? I’ll PM you my email address

Thanks

Brandon

 

[lilthom]

I'm going to have plenty of room on my trailer headed home.
I'm looking for several things:
- 17x9 beadlocks that are 5 on 5.5
- Bronco C4 setup
- Bronco Auto column
- Bronco 5 speed setup maybe np435 setup
- seats that work well with 5-point harness
- maybe even a complete Bronco
Shoot me a PM and let me know what you have.
Thanks

I have a NP435 from a 67 f100. It was matched to a six banger but I think the bell is the same. I have a rebuild kit for it as well.

 

[stout22]

Duff long arm brackets

Here's the pictures of the brackets. They were never installed. Packaging was opened to take pictures. They are for heim joints. I do not have the bolts.

 

[Banjer Picker]

2 Bilstein 5100 Shocks

2 Brand new, in the box.

These aren’t spec’d for an early bronco but I got a good deal on them so I snagged them to see if I could make them work. Too y’all for my rig

Part number 24-185776

Fits:
2005-2016 Ford Super Duty w/ 4” of lift (Front shocks)
1994-2013 Dodge Ram 2500 4WD
1994-2012 Dodge Ram 3500 Front w/ 0- 2.5” lift

I paid $100 for the pair. I’ll sell them for that.

 

[stout22]

The Long Arm Brackets are sold!

 

[sprdv1]

I'll have to remind Mudd about this thread.. the boy got lots of stuff

 

[VoltageDrop]

I've finally started working on my 69 crawler so I have some extra parts I could either bring to the park or you could pick up at my place near the I-430 / I-40 junction if you'll be going that way.

Dana 30 drum front - clean with fresh paint and new Timken king pin / wheel bearing parts 4.10 open. No steering.
Matching 9" rear - small bearing / 4.10 open (assuming) and gunky 50 year-old appearance
74 9" big bearing housing with brakes and 28-spline axles and a bare 3rd member. Housing was stripped and perches cut off by previous owner.
Dana 44 drum hubs and backing plates w/shoes and hardware
Stock 74 D44 axle shafts
Dana 44 (LP) 4.10 gears / empty carrier - a few chips on gears
Dana 44 (LP) 3.55 gears / open carrier
Ford 9" 5.38 Richmond gears - used with chips on pinion outside mesh area
302 / 3-speed / Dana 20. Engine block is an 80's casting. I have a new 2100 carburetor and fuel pump for it.

I am now putting GM 8-lug outers on my Dana 44 so I also have some 5-lug disc brake swap parts for sale that I no longer need. These would work on a D44 or the D30 listed above from what I understand. I'd prefer to sell as a set. $350 The parts are:
2 new Raybestos hub/rotor assemblies
2 GM spindles (used)
2 GM caliper brackets (used)
Longer spindle bolt set w/washers
2 GM reman calipers
2 new caliper hoses

05 SuperDuty Dana 60. No lockouts, steering, or brakes. Still heavy $400

Make offers! Buy all my stuff so I can buy more Bronco parts! ;D

I am looking for the main cargo floor panel if anybody has one for sale or knows how to get one without paying truck freight. An auto column, roll bar, or larger main fuel tank would also interest me.

I added some pics *here*. If you need pictures of anything else, just ask.

 

[Prizefighter]

Bubba is looking for a set of D44 3.50 gears so I will let him know about yours.




I am bringing several totes of stuff and do not want to return with any of it.

 

[Fitz24]

C4 and Associated Parts for Conversion to Auto Trans

I have just about all the parts needed to convert to a C4.

C4 trans (had it resealed 2 years ago)
Torque Converter
28 oz flex plate
Block off plate
spud shaft and bearing for d20
vent line for modulator valve
dip stick and tube
WH twinstick with knobs
cross member with mounting brackets
B&M extra capacity aluminum trans pan with drain

Asking $750 (Hoping to make OCBR but won't know until the week of the event)

Transmission worked properly when pulled . Did shift harder than I liked. Not sure if PO had shift kit installed but I was going to replace valve body but decided to go to the 4r70w.

 

[Prizefighter]

Anyone have a blue Ranger rear seat for sale?

 

[trxclint]

Hanson Front Winch Bumper w/ Fairlead Mount Plate
https://www.hansonoffroad.com/proddetail.php?prod=FEB1202-P

$450

Sent from my iPhone using Tapatalk

 

[sprdv1]

How much for spud shaft and bearing for d20 ? Sir

First dibs...

I have just about all the parts needed to convert to a C4.

C4 trans (had it resealed 2 years ago)
Torque Converter
28 oz flex plate
Block off plate
spud shaft and bearing for d20
vent line for modulator valve
dip stick and tube
WH twinstick with knobs
cross member with mounting brackets
B&M extra capacity aluminum trans pan with drain

Asking $750 (Hoping to make OCBR but won't know until the week of the event)

Transmission worked properly when pulled . Did shift harder than I liked. Not sure if PO had shift kit installed but I was going to replace valve body but decided to go to the 4r70w.