AR OCBR 2023 Parts Swap, Sale, Beg, Buy, Borrow.... POST UP

[stout22]

Wild Horses Rock Rails (Skis) for sale
Never installed. Still in original package.
https://www.wildhorses4x4.com/produ...-Panel-Protection-PAIR/Bronco_Guardian_Bumper
$350

 

[sprdv1]

back to top....

 

[sprdv1]

Wild Horses Rock Rails (Skis) for sale
Never installed. Still in original package.
https://www.wildhorses4x4.com/produ...-Panel-Protection-PAIR/Bronco_Guardian_Bumper
$350

Nice

 

[joe]

I can bring a HI 9 differential setup for a rear install. It has 4.88 gears and an ARB locker. The ARB has a leak but I have the repair part.
Asking $700
Let me know if you're interested otherwise I may not bring it ( it's mighty heavy just to haul around for show and tell).

Bring it!

 

[joe]

Bring it!

What's the spline count?

 

[stout22]

It's 31 spine but it should be sold

 

[mp]

I need a cheap plain jane factory 3.50 nine inch chunk. Anyone upgrade and have a core sitting around? Rebuild condition is fine, and spline count does not matter—it’s destined for a rebuild. I do need the factory 3.50 gears to be in good shape.

 

[fordguy]

A couple more goodies up for grabs. I went to different gearing so I have the stock ratio front and rear diffs with lockers in both. Maybe someone can identify the locker brand. My memory says Detroit but I will be 70 on my next birthday so not sure. This Felipe roll bar will be coming out when I get to OCBR if someone wants to take it home cheap.

What is the answer on lockers on this, are they still available

 

[lilthom]

What is the answer on lockers on this, are they still available

The lockers are Detroits. I am talking with the guy who is just interested in the 3.50 chunk minus the locker but I would really prefer selling the matched front and rear as a set.

 

[fordguy]

The lockers are Detroits. I am talking with the guy who is just interested in the 3.50 chunk minus the locker but I would really prefer selling the matched front and rear as a set.

New style, soft locker, older?

 

[lilthom]

New style, soft locker, older?

They don’t have many miles on them but have been in there for about 15 years.

 

[JSBX]

I have a receiver hitch like the one from Toms. $100
Back seat. $150
Mustang front dress. $40

 

[JSBX]

4 Penney hole aluminum wheels. 15x9 with 3.750 back spacing. These wheels take the shank type lug nuts that I have a new set with washers that will go with the wheels. They are not show quality and are not clear coated but in good usable condition. Asking $150.

Dana 44 ring and pinion with carrier 4.09 ratio. Came out of a late 70s F 150 or 78/79 Bronco. Asking $150.

 

[JWMcCrary]

I have 2 Detroit lockers, both 31 spline. Can bring to OCBR

One of them I bought new in 2005, right before United by Bronco in 2022 I stripped the splines off the axle on the left side, I replaced the axles and on test drive seemed like it was popping more than normal. This text drive was on pavement, due to me headed to Utah I didn't want to chance it so I pulled it out. It could be fine or might need a rebuild, has good bearings - $100

I could not get a new locker in time for my trip so I bought a used roundtrack detroit, have run it from March 2022 until August 2023, has always done the job but is very noisy, rachets and pops all the time in turns, I replaced with a new Yukon. Has new Timken bearings - $325

 

[muddford]

I will have some of the Baofeng radios-programed and ready to go if anybody need one!! I have 3-5w for $50 each and 2 8W for $55!

 

[Yeller]

I have 2 Detroit lockers, both 31 spline. Can bring to OCBR

One of them I bought new in 2005, right before United by Bronco in 2022 I stripped the splines off the axle on the left side, I replaced the axles and on test drive seemed like it was popping more than normal. This text drive was on pavement, due to me headed to Utah I didn't want to chance it so I pulled it out. It could be fine or might need a rebuild, has good bearings - $100

Sold! See ya next week

 

[JWMcCrary]

I have 2 Detroit lockers, both 31 spline. Can bring to OCBR

One of them I bought new in 2005, right before United by Bronco in 2022 I stripped the splines off the axle on the left side, I replaced the axles and on test drive seemed like it was popping more than normal. This text drive was on pavement, due to me headed to Utah I didn't want to chance it so I pulled it out. It could be fine or might need a rebuild, has good bearings - $100

I could not get a new locker in time for my trip so I bought a used roundtrack detroit, have run it from March 2022 until August 2023, has always done the job but is very noisy, rachets and pops all the time in turns, I replaced with a new Yukon. Has new Timken bearings - $325

Both lockers are sold

 

[JSBX]

Weiand 4 barrel aluminum intake for a 302was clearance for a hei distributor as seen in picture other than that it is in good condition. $100.
2 Holley 670 truck avenger 4 barrel carbs. Have been on a shelf in my shop for 5 years. They both ran good on Broncos before going efi. May or may not need rebuilding due to setting up. $100 each
Motorcraft 2 barrel carb that ran good 4 or 5 years ago. May or may not need rebuild due to setting up. $50
4 Motorcraft 2 barrel carbs and a holley 4 barrel. These came with a project several years ago. Parts missing on 2 of the 2 bbls. $30 for all 5.

 

[sprdv1]

Both lockers are sold

Nice

 

[lilthom]

What is the answer on lockers on this, are they still available

The front and rear differentials with lockers are available. They are stock gearing for 28 spline axles. The rear locker is a Detroit and the front is the lunch box style. I can't locate a brand stamp on it. Not a lot of trails on them at all. I just changed gearing so don't need them. $800 delivered.