Bundy
Bronco Guru
- Joined
- Jan 10, 2009
- Messages
- 2,045
Nothing great, but I have all the stuff I removed that was considered "da' shit" for 1992. Let me know if you're interested in anything, not looking for money for most of it- really just beer or a compelling/bullshit story. Pics available upon request-oh and pickup only- not shipping anything.
I have the following:
-stock shackles, bushings are toast but in good condition
- custom (?) trac bar drop bracket, bolts in over the stock one I think
- trac bar (no idea who made it, but worked on a 2-3" lift)
- 3"-ish? old rancho lift (I think), stiff coil springs (F250 maybe? perfect for street) with 6 adustable rancho 9000s. It's this pretty trick adjustable system where you run air lines to each shock and can adjust front and rear on the fly. Comes with all lines, simple fitting (dunno how effective cause the coils are so stiff), also the little compressor box and the two gauges and buttons. No leafs, they were old shit. The shocks all seem in good condition, need paint and that's about it.
- U bolts with plates, they look beefier and newer than stock but I put new ones on.
- Duff axle truss for a D44 front (it was the 90's?) It's not a good setup IMO, first thing I removed and it fit oddly. I'll dig up the part number if you're interested.
Like I said, it's mostly old and for show, but was functional at one time. Maybe some LUBR can use it?
Ryan B
Capo Beach
I have the following:
-stock shackles, bushings are toast but in good condition
- custom (?) trac bar drop bracket, bolts in over the stock one I think
- trac bar (no idea who made it, but worked on a 2-3" lift)
- 3"-ish? old rancho lift (I think), stiff coil springs (F250 maybe? perfect for street) with 6 adustable rancho 9000s. It's this pretty trick adjustable system where you run air lines to each shock and can adjust front and rear on the fly. Comes with all lines, simple fitting (dunno how effective cause the coils are so stiff), also the little compressor box and the two gauges and buttons. No leafs, they were old shit. The shocks all seem in good condition, need paint and that's about it.
- U bolts with plates, they look beefier and newer than stock but I put new ones on.
- Duff axle truss for a D44 front (it was the 90's?) It's not a good setup IMO, first thing I removed and it fit oddly. I'll dig up the part number if you're interested.
Like I said, it's mostly old and for show, but was functional at one time. Maybe some LUBR can use it?
Ryan B
Capo Beach











