• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Paint is done!!

fordguy

Contributor
Bronco Guru
Joined
Jan 23, 2005
Messages
6,362
good job. i just saw on your signature you have a flathead harley and you have the bronco. that is a man with good taste in vehicles.
 

bknbronco

Bronco Guru
Joined
Jan 17, 2011
Messages
4,388
Loc.
North Metro, MN
Wow, looks good. Are all those sanding discs from the underside? Your body does look a lot smoother on the bottom than mine. I put Herculiner on mine and it really cleaned it up nice. Looks like the quality control got a little better too, my tailight buckets didn't fit worth a crap and had very little to mount to. Looks like you're moving faster than me on the paint! Hey, did you drive all the way to Ohio to get this? I live within two hours of Lima, can't imagine how long that took!

Looks like you caught up to me and passed me up in my sleep! Ausome job! I wont be painting mine for a summer or two, but have plenty of other stuff to work on to get ready for the final touches. Again good job. Was looking at them pics again and wow i love the look of molded in fender flares! Reminds me of why i went glass! I cant wait to see pics of it all put together!

Also id like a pic of what you did to tie all the glass in around the area where the front fenders, hood, door, windshield frame, and cowl section all come together. I have a opening that im not sure what to do with? I cant have water filling up inside there. Maybe yours came together different? Do you know what area im asking about?
 

Attachments

  • Picture1.jpg
    Picture1.jpg
    78.8 KB · Views: 69
OP
OP
Tedster100

Tedster100

Chairman of the Bored
Joined
Aug 25, 2010
Messages
1,762
Also id like a pic of what you did to tie all the glass in around the area where the front fenders, hood, door, windshield frame, and cowl section all come together. I have a opening that im not sure what to do with? I cant have water filling up inside there. Maybe yours came together different? Do you know what area im asking about?

I know exactly what you're talking about. I used some of the expanding window sealing foam from Lowe's. That stuff is pretty durable and will seal up a pipe no-problem. It's actuall water reactive. Don't know if I can get any pictures now, I put a little bed liner on the top to protect the exposed portions of the foam from the sun & UV and to make it a little tougher.

It's going together slowly. Hoping to drive by Thanksgiving but I won't push it if I don't get there.

Thanks!
 

bknbronco

Bronco Guru
Joined
Jan 17, 2011
Messages
4,388
Loc.
North Metro, MN
I know exactly what you're talking about. I used some of the expanding window sealing foam from Lowe's. That stuff is pretty durable and will seal up a pipe no-problem. It's actuall water reactive. Don't know if I can get any pictures now, I put a little bed liner on the top to protect the exposed portions of the foam from the sun & UV and to make it a little tougher.

Funny thats what i was thinking. Foam up the hole, then paint over the top. Wish i could glass it into the body...well see.
 
Top