paint

[horseman]

Im nearing the end of my frame off. Almost all of the floor was replaced at the time I was satified with the under side being primed and painted. Now im having second thoughts about the durability. The body is back on the frame so my obtions are limited. Im more woried about the wheel wells . I reading that most liner type materials reqiuer sanding and chem clean prior to being applied. Can I /should i consider por 15 ? If i did can i brush on there primer over my paint without sanding than the por 15. Im worried about not being able to sand everything properly.

Thanks for your help

 

[antnykk]

I would check out lizard skin material. You might be intrested

http://www.lizardskin.com/

 

[horseman]

looks good anybody use this stuff? any pics?

 

[horseman]

any thoughts ?

 

[trailpsycho]

Take it to a bedliner shop, jack it up in the air, pull the tires and cover the axles and frame and have them shoot it.