• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

part ordering problems

bdrake1

Jr. Member
Joined
Mar 20, 2004
Messages
69
Loc.
texarkana
i ordered some parts from two differt vendors and did not receive every thing i ordered.the rear axles i ordered they did not put in the axle retaining plates.where would i be able to get theses i need my bronco going by this next weekend.but i also ordered a spool and did not recive it.so i am stuck there
 

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
Usually those retaining plates come with the axles, especially the aftermarket like Yukon, etc. You have a 4wheelparts in your area? Might be the best bet, I'd figure a 9" spool would be pretty common, especially if you are doing 31 spline.
 
Top