Parts Need To Go- 9 inch, Bushings, Tires and Wheels, Stock Radius Arms

[gravy]

I have a few parts that I need to get out of my garage. Not looking for a lot of money I just need to make some room. If interested in anything make an offer, I want this stuff gone. I can send pics if interested. Thanks Dave
email- dventi@metroonelpsg.com

1) 9 inch small bearing complete- 4.10 open- out of my 70 bronco

2) dana 44 open carrier 3.73 and down with 3.50 gears

3) Stock radius arms, stock track bar

4) 302 manual flywheel and good starter

5) 4 15x8 wagon wheels 5 on 5 1/2 w/33" mudders

16) New bushing kit- 7 degree installed but never driven with (black)

 

[DSGStang]

"9) 4 15x8 wagon wheels 5 on 5 1/2 w/33" mudders"

Do you have any pictures of the tires? What kind of condition are they in?

Thanks,
-Ryan

 

[FSRBIKER]

I'm interested in the following, I work over in Fairfield.

dana 44 trac loc 4.10 an up carrier and 4.10 gears
6cyl 3speed adapter

What condition is the Dana 44 stuff in?

 

[gravy]

pictures

I will take pics of everything tonight and send them. Please email me your email adress. Thanks Dave

 

[gravy]

Trac Lock

FSRBiker,
The gears seam to be in good shape. I never went offroad with the LP dana 44 so I'm not sure how the clutches are but everything is there. JBG sells the clutch kits and they are pretty cheap. The pinion is out of the housing already. The trans also worked fine when I took it out and the adapter is still attached. I want to get rid of the whole thing but not looking to get a lot of money for it or the other stuff. Let me know what you want to do. Thanks Dave

 

[Crewwzin]

How against shipping are you? Will the roll bar break down into 3 pieces?

 

[gravy]

roll bar

Its welded so it would be a little pricey to ship. I would rather not deal with shipping if I dont have to.

 

[Crewwzin]

Its welded so it would be a little pricey to ship. I would rather not deal with shipping if I dont have to.

I dont think there is a 4-point roll bar anywhere south of Tennessee that someone wants to get rid of. Thanks anyway.

 

[marcm2030]

I'm interested in dana 4 trac-loc and 4:10 gears and possibly 44 housing if FSRBIKER passes. Thanks Marc

 

[gravy]

I sent all the info earlier today but havent heard back yet. I will pm you if I havent heard back by tomorrow. Thanks
Dave

 

[FSRBIKER]

Gravy sent you a PM

 

[charliecorbell]

Roll bar

Send pictures if possible of roll bar. Interested, how much?

 

[gravy]

parts still for sale

Many parts still for sale

 

[gravy]

Update- Still parts left that need to go

 

[FSRBIKER]

thanks again Dave

I knew there was something I wanted to look at, the 7 degree bushing kit. Poly, what is included?

 

[gravy]

Bushing Kit

Any time. The kit includes Radius arm bushings, c bushings and track bar bushings. I have a picture if you want it. Looking for $30 for the set. Let me know. Thanks

 

[gravy]

update list

I updated the list since I have sold a few parts. If anyone is interested in anything let me know. Thanks Dave