• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Petronix coil question?

Bronco Sport

Bronco Guru
Joined
Jul 29, 2003
Messages
1,568
Loc.
NW Portland, Oregon
I'm replacing my coil with a new Petronix coil, but I'm not sure what side is to the distributor. My old stock coil was list "BAT" on one side and "DIST" on the other. What side is considered positive and what's negitive? %)

Thanks!
 

blazinchuck

Bronco Guru
Joined
Jul 14, 2005
Messages
3,319
I had the pertronix kit in my dist. but something went wrong and my super stock coil went bad...so I put the points back in. I dont think it would run, the dist. needs a ground for the points or the conversion kit has a posi and neg. wires. I dont think I would try. Are you sure there is no + or - sign antwhere on the coil?
 
Top