• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Pick and pull sunday

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Scored again at the pick and pull. Got 2 sets of armrests in perfect condition 1 parchment, 1 blue, spied another set of blue ones but didnt need them. 2 groove water pump pulley. 1in rear blocks off a 82 FSB. Hopefully the big score pans out a ch@vy disc brake setup for my 71 although I'm a little unsure right now as the setup was on a 82 pickup I think hard to tell as every part seemed to be different but I pretty sure it was a d44 front axle so someone may have swapped it. Have to fit up the parts I got then go back for the rest. paid $35 for spindle and backing plate so if it doesnt pan out I wont be too hurt.
I never seem to find ant Hboost parts there except in the lincolns but most of those setups are close to 30 years old so I really dont want them.
As a bonus I saw a Red uncut all stock down to the hub caps possibly a 76 on my way home looked like orginal paint too.
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
lucky dog you!

Man Our Wrecking Yard Here Just Doesnt Seem To Have Anything I Looking For Latly ...or The Turkey Running It Is So High Priced ...you Just Have To Leave It There..
 
OP
OP
B

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
I hear you we used to have 3 P/P's 2 were cheap and the other you never knew what you were going to pay. down to 2 now but I usually only hit up one been watching it close as they have started getting quite a few 4x4's in lately. I try to go every other week to see if they have any new stuff. They had a ch@vy truck that I couldn't wait till it got in the yard for the disc brakes it finally made it in the yard but I was there to late the whole front axle was gone but I lucked out and there was another one there. Someone had already removed the caliper on the pass side so I got that side spindle and backing plate wanted the axle shaft but it was being stubbron and wouldn't come out of the knuckle. I'll go back next week with the correct allen wrench to remove the caliper bolts and get the other side although with my luck it will be gone.
 
Top