Pix of a heat riser

[elan]

Morin' gents. Anyone have pix of a heat riser that comes up to the down tube on the air cleaner? It is for a '67/'68 Bronc V8
It should be on the passenger side as usual.
I'm thinking it is the smaller one that bolts up to the back part of the exhaust manifold but I can't recall

Best,
Broncosilly

 

[DirtDonk]

Sorry, I only have the newer style that was on the front of the exhaust for the '71 forward facing snorkel.
Now that I think about it, I'm not sure if I've ever even gotten a good look at one of the earlier ones. When I would see the early air cleaner, it was obviously in the way and I was not looking underneath.
When they were changed out, I'm guessing that often as not the owner took off the heat riser metal as well.

Good luck. Interested to see what they look like myself.

Paul

 

[House]

It should look like this.

 

[jckkys]

This part and the snorkel are easier to find as Mustang parts.

 

[DirtDonk]

That's a long sucker ain't it? Must go right up to the snorkel and attach directly? Any "hose" or coupling that's used, or does it just slip right over a fitting on the intake snorkel?

Thanks

Paul

 

[mafconc]

Heat Riser

I think the 66-69 style heat risers are available on early mustang parts sites for about $90 but have never seen the 70-77 eb style for sale anywhere.

 

[House]

Correct Paul, there is no soft hose between the two.

 

[56f100bbw]

Looking for a heat riser tube from the manifold to the snorkel I bought one on eBay and it’s too small diameter little bit more than 2 inch would work who sells them

 

[56f100bbw]

77 bronco air cleaner is what I have 73 and older is Smaller dia. and it wouldn’t work that’s what they told me

 

[jckkys]

This;https://www.ecklers.com/1964-1967-m...erm=4583245503514102&utm_content=All Products is what Mustangs had. I don't know if the tube fits in the air cleaner snorkel. Some knuckle head tossed the one on my '68 before I got it.

 

[56f100bbw]

Thanks I will check it out

 

[chuckyb]

This;https://www.ecklers.com/1964-1967-m...erm=4583245503514102&utm_content=All Products is what Mustangs had. I don't know if the tube fits in the air cleaner snorkel. Some knuckle head tossed the one on my '68 before I got it.

I got one of these Mustang heat risers for my 68 with 289 - it’s a perfect fit into the snorkel on the stock 68 air cleaner.