• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Porting a C2 pump

7.3diesel

New Member
Joined
Jan 10, 2014
Messages
14
Hey guys,

I happened to stumble upon this forum looking at information for a power steering mod I am doing now on my diesel f350. Anyway I learned about the Russell fittings fitting too far into the pressure port bore and causing trouble so that saved me there already. I had that fitting here ready to be used and am going a different way.

Just curious as to if anyone knows of mods to increase flow/pressure on these things? I know about drilling the pressure orifice out, anything further I should do?

Thanks
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
I wouldnt mess with modifing a C2 pump they are not that great to start with. But if you do play with it you want to make sure you test the pressure it puts out if you try to build to much you'll destroy something and most likely the pump wont last long either. Id heed the WTO warning about going to far. Also streching springs is not that good of a idea as it does change the spring rate and overall weakens the srping especailly if you strech it a little to far.
 
Top