• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

power steering woes

craigaria

Sr. Member
Joined
Apr 10, 2005
Messages
848
Loc.
Monroe, GA
make sure the belt isn't slipping or broken. Also check your ps fluid. Hopefully it is something simple. If not it could be the pump.
 

stevew

Bronco Guru
Joined
Jun 21, 2001
Messages
2,123
Loc.
Elliston Montana
May just be air in the pump . Happened to me last year teaching my daughter to drive in the Bronco . She couldn't get it into her head that she didn't need the entire ShopCo parking lot to turn around so I took over & did full lock turn-around in the length of the Bronco turns ... hot & heavy & oops ! .. no p/s ! I too figured I'd killed the pump screwing around but when I pulled into my driveway after a 20 mi drive home .. the p/s came back ! That was a year ago & all's still well .... ;D
 

craigaria

Sr. Member
Joined
Apr 10, 2005
Messages
848
Loc.
Monroe, GA
If the belt isnt slipping then it might be your pump. Could be like stevew said too. Was your pump noisy before? Alot of times you can hear a pump when it is about to go bad. If you dont allready have a saginaw pump, upgrade to that, if the pump is bad.
 
Top