• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Primer for single stage paint

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
Is there a primer that comes in a spray can that can be used under single stage paint? Going to be a while before paint and need something that can be sanded and prepped without having to get it all off later, if possible.
If it sounds like I don’t ‘now what I’m doing...congrats, dead on.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
My generic answer would be to stop by the paint supply shop where you will buy the paint at and ask them. That way you know you will have a compatible product for the final paint. Not everything is compatible. When I had my last project painted the body shop that was spraying it had the line of paint they use, and all the stuff that goes under that paint is in the same line and all compatible. For me it was simply picking up the right can of matching material and shooting that at home, did the last of my work, and turned it over to paint. They knew what was on it and it was a compatible product.

Guessing you may not be that far ahead right now. I think what you need is more of a sealer than a primer. But I am no expert either. I want to say that many primers are porous so the steel can rust under the primer if you leave it out.
 
OP
OP
JWMcCrary

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
Planning to use paint from Summit and was going to ask them, thought i would get some opinions from here as well. I think you are probably correct on sealer vs primer. Was hoping I could get some spray cans for the time being to take care of my needs, will be a few months on paint.
 

fordguy

Contributor
Bronco Guru
Joined
Jan 23, 2005
Messages
6,362
I am buying some epoxy from English paint supply in Jackson for bare metal
 

markw

Contributor
Bronco Guru
Joined
Sep 10, 2009
Messages
2,066
I've used SEM high build primer in rattle can under all kinds of paint with good results. I wouldn't leave it uncoated for long though.
 
Top