Project: 76, Orange Special Decor

[gnsteam]

Slide this up behind the exiting panel and mark where to put your holes?
3/32" comes in black anodized even.
https://orangealuminum.com/shop-all/edge-trims-finishing-profiles/edge-trims/

Hi, .94 OR: Thanks for the link. I like this suggestion. The 3/32 J Cap just might work.

 

[.94 OR]

I'm thinking the holes in the J cap could be oversized once marked to make alignment a lot easier and would allow you to keep the cap tight against the edge of the ABS. Snug the bolts down to hold everything in place.