• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

pto winch bumper and transfer case assembly

gddyap

Bronco Guru
Joined
Mar 8, 2005
Messages
1,334
Loc.
Mtn View, CA
I sold a bumper, pto winch, driveshaft, pto gear assembly, and shifter for $500 a couple years ago. Paid for a 3spd to C4 swap.
 

gritz

Sr. Member
Joined
Jun 27, 2007
Messages
473
I am looking for a 6 cyl version but I see you are in oregon. Shipping would probably kill me.
 

MyOriginal66

Bronco Guru
Joined
Aug 11, 2009
Messages
2,073
I paid $600 shipped for my chrome one. In good shape and complete but I'll end up restoring it.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,341
Id say $500ish is about all you can expect. A lot of people dont want PTO winches anymore so it can be hard to sell.
On a side note I dont think there is any differance between the V8 and 6cyl versions as the T case is in the same exact location on both so the driveshaft will be the same lenght.
 

CopperRanger

Bronco Guru
Joined
Sep 26, 2007
Messages
1,795
The length of the 2 piece driveshaft and how it mounts to the frame is the difference between the 6 or 8 cyl.
 

Attachments

  • pto.jpg
    pto.jpg
    75.6 KB · Views: 24
Last edited:

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,341
No big deal top modify the driveshaft. Most likely a v8 version would still work in a 6cyl. Its just a straighter shot for the 6cyl where the V8 had to bend around things.
 
Top