• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Pull-A-Part Tools and Finds

msweb

Bronco Guru
Joined
Aug 29, 2003
Messages
2,377
Other than basic sockets, wrenches and other typical hand tools, what do you take to the pull-a-part yards? I'm thinking cordless driver, cordless impact, bottle jack, pry bar, cordless reciprocating saw, wagon, cooler full of beer.... What else?

Any particular items you keep an eye out for even if they aren't on your list?
 

SantaCruzBronco

New Member
Joined
May 9, 2010
Messages
27
Loc.
Santa Cruz
A can of PB Blaster! A good sized knife and a cold chisel. Besides that I only bring special tools if I know I'm going to need them.

I keep a look out for a couple of things I know are worth big bucks: Light Bar from an 87-89 Nissan Pathfinder (can easily fetch $300, as you can guess they're very rare), sunroof cover from a Nissan Pathfinder, stock rear spoiler from mid 80's Toyota MR2, front coil springs from a early 90's Jeep Grand Cherokee (used as lift springs in Jeep Cherokees and Nissan Pathfinders). Early Explorers have a great generic external transmission cooler if you're looking for one.

Otherwise I just keep my eye out for fuses and anything that's just too cool not to take home.
 

JGbronc

Contributor
Bronco Maniac
Joined
Mar 30, 2007
Messages
6,390
Loc.
Hytop, Alabama
Just a heads up, PAP does not allow you to carry in jacks or torches. I know it makes it more difficult. %)
 

TN1776

Bronco Guru
Joined
Oct 24, 2006
Messages
2,632
I usually carry a very sharp pocket knife and a leatherman tool, along with basic hand tools (sockets, wrenches, hammer, screw drivers, etc), and I only carry specialty tools if I'm going after something that requires them. I've used the knife and leatherman countless times!
 

Pedestrian

Bronco Missionary
Joined
Sep 10, 2008
Messages
2,299
Bottle jack is too heavy, just find a screw jack in one of the cars if you need one.
 

RustyShackelfor

Bronco Guru
Joined
Nov 30, 2009
Messages
1,593
Loc.
Centerville, TN
I have 1 toolbox I carry in with everything in it I will need. More tools I keep in the trunk in case I find something that wasnt on my list and I need the tool. The toolbox gets really heavy really quick, even in a wheelbarrow.

I also like to run in first without anything to map out and arrange an itinerary and go grab my tools. Maybe I am a little too methodical about it.
 

ransil

Bronco Guru
Joined
Sep 6, 2003
Messages
8,138
I try only to carry what I need for the job that day, mostly it is a basic tool set, I do take extra stuff but it stays in the car until I need it, pack light... I also use a back pack with multiple compartments to separate the tools. Can't carry a tool box and parts..

Jacks, hammers and pry bars can be found laying all over the junk yards.

To carry parts I have mad sleds from door panels and seat belts..
 

ken75ranger

Bronco Guru
Joined
Jan 27, 2002
Messages
5,069
Loc.
Troy, NY
Bolt cutters can be handy. One of my favorites is a pair of Craftmans handi cutters
showImage.ex
 

lonesouth

Contributor
Bronco Guru
Joined
Dec 18, 2003
Messages
5,048
Ditto on mapping out then retrieving the tools. PnP removes all the jacks before they set the cars out, but the cars are set on an inverted "T" made from two wheels welded perpendicular, so there is plenty of room underneath. I'm always looking for Mustang ECUs, haven't found one yet, but always looking.

Breaker bar is a must have! Mechanics gloves, basic sockets, battery drill with socket adapter, box cutter + extra blades, lineman pliers, side cutters, vice grips, crescent wrench set, BFH, drift, strap wrench, battery sawzal if I know I'll need it.

I was suprised last time I removed a taurus fan, that when I cut the line for the AC, it was till charged!
 

Revelation

Bronco Guru
Joined
Oct 9, 2004
Messages
4,825
In addition to wrenches and sockets channel locks (Huge ones) vice grips, allen set ect ect I take line wrenches and a Klein 11 in one screwdriver.
 

techlaf

Sr. Member
Joined
Jun 28, 2008
Messages
692
Old padded shipping blanket in case you need to get on the ground or lay down in a nasty old truck.
Smaller cooler with drinks. It can get really hot out there.
My iPhone was invaluable for looking up choice parts list on CB.com
 

Hal9000

Bronco Guru
Joined
Oct 12, 2008
Messages
1,324
Loc.
Flagstaff, AZ
Leather gloves, a few pairs of vinyl exam gloves, a good pair of all purpose cutters (tin snips work well), Large water pump pliers, an assortment of small adjustable pliers (like small vice grips), a cheap socket set, a good assortment of combo wrenches, BFH, rags, assortment of screwdrivers and a single pry bar of convenient size (not huge, med sized is good). Hacksaw and good blades.

Pre apply sunblock or wear a hat.

Putting tools in a heavy duty day pack or your kids school knapsack can be helpful. Keeps hands free and saves your arms from fatigue.
 

ransil

Bronco Guru
Joined
Sep 6, 2003
Messages
8,138
Old padded shipping blanket in case you need to get on the ground or lay down in a nasty old truck.
Smaller cooler with drinks. It can get really hot out there.
My iPhone was invaluable for looking up choice parts list on CB.com

I use floor mats, trunk liners , door panels what ever i can find lying around.

get the flashlight app for the Iphone or Gphone comes in handy...


hand cleaner , i keep that and a roll of paper towels in the car...

always take the shitty car junkin don't show up in a 60K king ranch super duty..
 

Ratch

Contributor
Sr. Member
Joined
Nov 1, 2007
Messages
695
always take the shitty car junkin don't show up in a 60K king ranch super duty..

HEY!, were Bronco owners...we cant afford one of those! %)
Other than that, got about everything else covered. Have taken a small gas powered air compressor in, makes short work of a trans removal.:cool:
 
OP
OP
msweb

msweb

Bronco Guru
Joined
Aug 29, 2003
Messages
2,377
Some really great posts and geesh, I'd have never thought about cutters for hoses rather than a knife. Bee and hornet spray is also one I'd never have thought of but could literally be a life saver!

Keep 'em coming and btw, ya'll forgot the most important thing to bring - a friend! ;D

Ratch, Rusty, Ben and I will be headed out there on Thursday if you're free and want to poke around with us. Probably around 11ish. I call dibs on all the good stuff ;D
 
Top