• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Pull-A-Part Tools and Finds

Smokeater11

Bronco Guru
Joined
Jun 14, 2006
Messages
1,971
Loc.
Auburndale,FL
A couple of things that I have found rather handy other than the above mentioned items is a set of nut drivers, a set of allen head sockets, and a set of Torx(the star shaped) sockets. Also remember that most modern cars are metric so don't forget to bring your metric sets of sockets and wrenches too. You wouldn't believe how much easier the nut drivers make it to remove all the skirts and shrouds and hose clamps the modern cars have. I know a trip to the pull it yard is not about speed but I still like to work smarter than harder. A wheel barrow or a little red wagon with pneumatic tires is a must if you're planning on being there for a while.

One of the neatest things I ever saw at a pull it yard was this old guy with a big high sided wagon and he had a 8 foot tall piece of conduit with an orange flag at the top attached to his wagon. I asked him what was the deal with the flag and he said it was so that he could find his wagon when he walked away from it while going up and down the isles. I guess he learned from experience.
 

RustyShackelfor

Bronco Guru
Joined
Nov 30, 2009
Messages
1,593
Loc.
Centerville, TN
Some really great posts and geesh, I'd have never thought about cutters for hoses rather than a knife. Bee and hornet spray is also one I'd never have thought of but could literally be a life saver!

Keep 'em coming and btw, ya'll forgot the most important thing to bring - a friend! ;D

Ratch, Rusty, Ben and I will be headed out there on Thursday if you're free and want to poke around with us. Probably around 11ish. I call dibs on all the good stuff ;D

Headed to pull a part in Nashville? WHat are you looking for and I might know where it is or what they have. I go once a week every week.
 
OP
OP
msweb

msweb

Bronco Guru
Joined
Aug 29, 2003
Messages
2,377
Headed to pull a part in Nashville? WHat are you looking for and I might know where it is or what they have. I go once a week every week.

I'll be looking for a suitable column for a swap and some little odds and ends. Ben has a whole list. I'm not that organized....
 

RustyShackelfor

Bronco Guru
Joined
Nov 30, 2009
Messages
1,593
Loc.
Centerville, TN
one late 70's ford truck has a tilt column and auto but it was pretty beat up.

there are 2 dana 44's from a 78 truck and 78 bronco there, though. i already pulled the steering boxes, though.

depending on what you are looking for, you probably want to hit the antique section and then the rest.
 
Top