- Joined
- Oct 14, 2004
- Messages
- 5,001
I'm using a Holley fuel pressure regulator that has the manifold vacuum connection. On my initial install I had this hooked up but was having some problems that later turned out to be fuel tank vent related. In the process of troubleshooting I plugged off the vacuum port and have left it that way. I've read conflicting information on whether you should or should not use it and had been convinced until recently not to use it. After studying further it seems the Terminator is in fact a system that you should use it because the injectors are below the throttle plates.
Just curious who else may be using it with the manifold vacuum and whether it's worth having to let the fuel table learn again to make the change.
Just curious who else may be using it with the manifold vacuum and whether it's worth having to let the fuel table learn again to make the change.











