Rampage headlight conversion.

[bluebronco69]

Just wanted to share with everyone because I hadn't seen a review or notes on this yet for Broncos.

Got the rampage 5089925 headlight conversion kit from Amazon (4wheel parts) for around 70 bucks. It was advertised for jeeps. But I figured it should fit anything with 7 inch sealed beams (Broncos...) Bought it and gave it a try.

Parts were well packaged, you have to,assemble (install the bulbs and rubber boot, but this is very easy for any bronco guy or gal.
These have a glass lenses and metal housing. Quality feels good. Fit is nice and snug. The rubber boot touches the bracket that holds the headlight bucket spring, but no big deal. These required more pressure to alight and keep in place in the bucket before installing the hold down ring, but no big deal. Plugged right into,my headlight harness from TBP.

Fit great, bright, nees to adjust and get,out with them at night, but so far so good.

Rampage Jeep 5089925 Halogen Conversion Headlight Kit https://www.amazon.com/dp/B001OMPJGS/ref=cm_sw_r_cp_apa_s.ljAbN321QWZ

 

[Broncobowsher]

How is the beam pattern? Good cutoff or a bunch of glare?

 

[bluebronco69]

Not sure yet. Will get them aimed and out for a drive soon

 

[DirtDonk]

Looking forward to hearing your thoughts on that most important aspect.

Paul

 

[sprdv1]

Not sure yet. Will get them aimed and out for a drive soon

Interested as well.. Post them pics up

 

[RPM289]

Following form my Bronco and Mustang both!!!

 

[DirtDonk]

While we're waiting here are my old (about 20 years?) Hella H4's with standard bulbs for a quick, unscientific reference.
Have not taken the time to aim them yet, but they actually seem to do ok so far.
You can clearly see the relatively flat top and high flare up to the right side.

Daytime against the garage door:


Night time same garage door:


Same door, but different days so position of both the vehicle and camera are questionable. Again, just for a point of reference.
Thinking of buying a set of the Cibie/Valeo lamps as well, but if Hella will replace my other (newer) set with the ugly pattern I'll stick with them if they work better.

Paul

 

[DirtDonk]

Ok, so how do we rotate photos again?%)

Paul

 

[bluebronco69]

ok, here are some from the install. will get night shots soon, need to aim them for sure.
much clearer than factory style, but that is because the reflectors and diffusors are in different spots.
the bulb is easy to install and change, as i mentioned the rubber boot rubs against the factory headlight bracket a bit, you can see the impression in the photo, but no big deal. these housings have alignment tabs just like factory bulbs, they fit perfect into the factory bucket alignment slots.

 

[sprdv1]

Ok, so how do we rotate photos again?%)

Paul

LOL, hate that....

 

[sprdv1]

Cool man.. Easy is always good

ok, here are some from the install. will get night shots soon, need to aim them for sure.
much clearer than factory style, but that is because the reflectors and diffusors are in different spots.
the bulb is easy to install and change, as i mentioned the rubber boot rubs against the factory headlight bracket a bit, you can see the impression in the photo, but no big deal. these housings have alignment tabs just like factory bulbs, they fit perfect into the factory bucket alignment slots.

 

[bluebronco69]

They were very easy