• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Ran her on the Dyno today

rjrobin2002

Contributor
Bronco Guru
Joined
Oct 13, 2007
Messages
2,951
Nice, what engine, muffler, and peak HP/torque? I couldn't see the power curve numbers on my smart phone screen
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
I can't read the numbers on my 17" monitor either...too fuzzy.

Be interested in the numbers too...
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
The text under the video says "283 to 329 horsepower at the wheels." but I'm not really sure what that means.
Perhaps it's that it started at 283 before a tune, then ended up at 329 after tuning?

Could also be that it started out at the bottom of the graph (whatever rpm level that is) at the low number, jumping to the 329 at it's peak.

Interested in hearing the details as well.

Paul
 
OP
OP
B

B0neCrush3r

Jr. Member
Joined
Nov 8, 2018
Messages
61
So here's the story. It had an existing SCT tune and using pcs transmission controller for the 4r70w. Driving it out of overdrive in 2nd felt amazing, when driving in OD it was sluggish and shifted too early. Something was off.

Tony, has a great reputation here in town. I wanted him to tweak the current tune and adjust the shift points for me.

He did a great job. That is a 2012 coyote crate engine from ford racing. There is significant horsepower loss from engine to wheels. I could improve that by changing a few components, but its driving great.

If anyone has any specific questions I'm happy to answer.
 
OP
OP
B

B0neCrush3r

Jr. Member
Joined
Nov 8, 2018
Messages
61
Dyno results, run 1, run 4 and final.
14e5b01f98cd7dd5a388f67cc9c48123.jpg


Sent from my SM-G975U using Tapatalk
 

5001craig

Contributor
Bronco Guru
Joined
Nov 3, 2013
Messages
1,180
There is significant horsepower loss from engine to wheels.

That's an understatement. Here's mine. Running very heavy LR E 35's and 4.10's (reason for the gear choice is in my build thread). I think going EFI would help as I don't feel my carb is dialed-in.

nU7CzSBGL2BlMbwzjiQQI1XpZfboAWVpjmoO2JSdrKtBnR-FjirmGY3XtP_-z7AVFgZE04r0YC0sZD---k6DKtAhRUBwzYtfPWlcRAJH-66WfaeVUQsxE40Nk-lxP8wdw93VVqs-hkJ5hG3ITrFX7Guhqq0_SfRJ0dN6pz1VM7YKge7NxtRQesUq_z7p_gOpsJDKBng4ceLCR0nshSSthhOqx5Ke21zn661owje8iI4UNB37CI8ROwTXYDy_9rkfWT99vWwO4QJODGzC7O6G__7qixHensGeIF0LsIcRNbFPAFU2kDQABAie1EU5-6Aozt5NYLcn_9_WkEuOPoD0_jXYb8QYrvrk2XJANB7OGV2lfuIZ6_wwJg9pMLyK8m-ByNzhtt1eYvtjZBZDvzOtMjGjK5K9Y_aov3Hiqsz1Qr47-qhGYOkmUajzS21T3eIGNWYrzOqdBvoOki2u_4cRBFjILauO7Lv6ZEmuUctfoh81ymIk5BOmUyJixZ0QjfGUE6Ri6okhew5DmnejjrY3IMaDautVC93eaDzYJtLS4GUmiys1dA_Q1tqT9X-ovaNWcar0t7-dGlu-lxpA-LHy9Zs1WZiFDxPZKdfg72xLa0yOREFkEeODHGxSjpZmoTrS67nz4JHkGVw-U3CT_-D7qOTKWTvr-rkK=w1279-h960-no


But it works well in the sand. ;D
 

bsquared

Contributor
Sr. Member
Joined
Dec 4, 2010
Messages
972
Suweet looking ride, brother! She's a screamer, fo sho! Congrats, B2
 
Top