• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Rear End Clicking Noise

Izzy

Bronco Guru
Joined
Sep 5, 2009
Messages
2,430
Loc.
Texas
After replacing my front bearings, I though I'd check my rear bearing and see if they needed replacing as well.

I lifted the read end and gave the wheels a spin to listen for noise and I hear a loud clicking noise in the rear end.

When I spin the passenger side tire, the driver side tire spins the same direction as expected.

But when I spin the driver side tire, it spins by itself and you can hear a clicking noise in the rear-end.

This axle is a Ford 9 with a detriot locker installed.

Is this normal? Do I have a problem with the locker that needs to be fixed?

Also, I did put the tranny and Tcase in neutral for this test.

Appreciate the help.
 

ScanmanSteven

Bronco Guru
Joined
Dec 19, 2010
Messages
1,129
Any time you have a locking device both tires should spin in the same direction when jacked up. Could be a broken axle or defective locker. I forsee pulling the carrier to check it out.
 

spap

Bronco Guru
Joined
Jan 2, 2010
Messages
2,642
Do they both turn if you turn the drive shaft. Detrits click when they are not engaged to be able to go around turns. Sounds pretty normal unless you turn the driveshaft ans it still does not move then you might have an issue.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,110
Red beast?
Detroit locker.
Normal.

You can play with preloading one side against the driveshaft and the other side will lock or ratchet depending on which way you spin it.
 
OP
OP
Izzy

Izzy

Bronco Guru
Joined
Sep 5, 2009
Messages
2,430
Loc.
Texas
Yeah, it's the beast. I see now that it is normal. Just didn't know.

Thanks for the help once again.

What would I do without you guys. ;)
 
Top