• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Rear shackle bushing

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Great. Good to know.
Thanks for the extra legwork.

Hopefully others will see this info when it’s their time to install a set.

Still, wouldn’t be a bad idea to install one in the hanger and pivot it both ways to see if there’s a difference. Even though they can go both ways, you might find that it allows more travel in one direction than the other. And that might be handy to know at some point as well.
 

savage

Bronco Nut
Joined
Apr 18, 2007
Messages
2,483
Loc.
Renton
Great. Good to know.
Thanks for the extra legwork.

Hopefully others will see this info when it’s their time to install a set.

Still, wouldn’t be a bad idea to install one in the hanger and pivot it both ways to see if there’s a difference. Even though they can go both ways, you might find that it allows more travel in one direction than the other. And that might be handy to know at some point as well.
I was think about that.I would assume you would have more downwards travel than upwards travel. Is this Wright or is it the other way. Tom's said they designed it after the OEM and the bracket does stick out a little ,but you would really have to flatten the springs out for it to hit.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Yes, with most modern springs they probably don’t even flatten out enough to extend the shackle rearward enough to hit because they’re already fairly flat. An old-school set of very highly arched lift springs however could probably reach the limit.
So yes it’s mostly when the suspension is extending downward and the shackle is pulling forward that you see the most shackle movement.
And would therefore benefit more from the shackle’s ability to pull forward.

Because the new shackle is just enough different looking from stock to possibly make a difference in this, I was curious if the new one made a difference. The factory shackle definitely is limited when you reverse it. Maybe the design of the new shackles gets rid of this limitation.
 
Top